Calling all 2009 KLX Owners!!!
#72
I have an Aust 09 I get the same noise under load but my noise seem to be "pinging" or pre igniting of the fuel associated with to higher compression . I used to have a modify GTR torana did the same thing used to have to run it on av gas to stop it.It normally appears under load and sounds like a rattle in the motor
#73
I have an Aust 09 I get the same noise under load but my noise seem to be "pinging" or pre igniting of the fuel associated with to higher compression . I used to have a modify GTR torana did the same thing used to have to run it on av gas to stop it.It normally appears under load and sounds like a rattle in the motor
#75
Get the "collar" that goes with the N1TC needle (see the sticky thread for the Kawa' part number) and raise the stock needle with it (approx 1.5 mm.) That'll help. I run BP Ultimate 98 whenever possible, the Caltex isn't he same IMHO. Put some Synth" oil in the bike, that'll help too. I use Motul 5100. Works well. PM me if you need any more help with the jetting.
#76
new update. took the bike to the dealer for some warranty issues. the battery wasnt holding a charge. when the mechanic was checking it out he commented on my random idle. turns out the idle mixture screw was only 2 turns out, and after putting a scope on it, he tuned it to 3.5 turns out. so its been running lean for the last 400 miles...horay...lean=hot. im hoping there wasnt and damage caused by it.
#77
Hey guys! Newbie here
Hey guys,
Now that I finally ordered my KLX, I thought I'd join this forum. Thanks to everyone for providing so much information.
I can't wait to get the bike. They're shipping it up from Christchurch by the end of the week. (Pray for a sunny weekend!)
Cheers.
Now that I finally ordered my KLX, I thought I'd join this forum. Thanks to everyone for providing so much information.
I can't wait to get the bike. They're shipping it up from Christchurch by the end of the week. (Pray for a sunny weekend!)
Cheers.
Thread
Thread Starter
Forum
Replies
Last Post