Ok Guys this is my first post and I am new to the forum. I have a 97 zx7r and i am having problems. basically the shop i was at said that the main harness went bad and it will be about a 1000 to fix. now I am not spending that type of money on wiring , I am a certified 12volt technician. So i just ordered a service manual to be safe but my question is has anybody done this yet and any one have a tips adviece or even thoughts on the shop? love to here any discussion.

 

I would highly doubt the whole wiring harness is bad. You just need to find out which individual wires are bad, and replace them.

What's the problem anyway?

 

There are alot of individual wires in that said harness. I too am curious on what was or is the issue.

 

hey sorry guys i just forgot about tthis post. turns out the mechanic was a jerk and the wiring was fine it was a fuse all along i felt nervous at first because i had yet to work on a bike so i fig. let the proffesional do it. apparently there is some difference unbeknownst to me that just because your mainly a harley mechanic you dont know how to check fuses

 

hahaha - does that mean when harleys have wiring problems they have to replace the whole harness? lol

 

haha, right on CC.

edit: what do ya say on moving this to the 7 section? ok, done

 

a fuse, what a tool. If you had let them they would have changed your fuse,put in probably 1/2 of the wiring (the paret you can see)and hit you for 1000.00

Kill all cheating arss freaking dealers. They are all the same arss freaking sheit!
[sm=rant.gif]

 

lol well like i said i am a 12 volt specialist so i decided to tackle it when he said that "he could not figure it out with his diagnostic tools" you tell me when there is an electrical issue that cant be found with a multimeter guy was a complete tool and now it is in another shop that it has been in for two weeks and no phone call....i cant win lol