Need some help here....

Thread Tools
 
Search this Thread
 
  #1  
Old 05-14-2008, 04:32 AM
jfinley's Avatar
Junior Member
Thread Starter
Join Date: Apr 2008
Posts: 12
Default Need some help here....

Ok, earlier tonight I took my 2003 ninja 500r to a friend's house to watch the basketball games. When I went to leave, my bike wouldn't start for me, so I put the choke on and it started up. However, when I went to pull out it stalled out. I thought that was odd, but then I started t up again and it started just fine, but when I went to pull out again- it stalled. I have never had problems with it starting or stalling before. Any ideas as to what the problem might be? Thanks for the help!
 
  #2  
Old 05-14-2008, 02:13 PM
dragknee's Avatar
Senior Member
1st Gear Member
Join Date: Apr 2007
Location:
Posts: 264
Default RE: Need some help here....

was your kickstand down?
 
  #3  
Old 05-14-2008, 04:28 PM
hoedogg's Avatar
Administrator
1st Gear Member
Join Date: Feb 2006
Location: bay area cali
Posts: 17,484
Default RE: Need some help here....

+1^^^^^^^^^^
 
  #4  
Old 05-15-2008, 01:38 AM
mookbooker's Avatar
Junior Member
1st Gear Member
Join Date: Jan 2008
Location:
Posts: 16
Default RE: Need some help here....

Im a pretty new rider but when trying to leave Chik-fil-a once, every time I put it in first gear to drive off I would stall out. I finally looked down after 3-4 times and saw my kickstand was down. Turns out this was the problem. (not a problem) This is actually a very good saftey feature.. you don't want your kick stand out like that when trying to make a left hand turn!! Hope this was your problem.
 
  #5  
Old 05-15-2008, 02:15 AM
jfinley's Avatar
Junior Member
Thread Starter
Join Date: Apr 2008
Posts: 12
Default RE: Need some help here....

I don't think it was the kickstand, but I could be wrong. To me it never sounded like it was running well, sounded like it was going to stall at any time- even while I was just stilling on it without putting it in gear. Then when I put it in gear it gave out.

I went and picked it up today, and it did the same thing in that it didnt sound like it was running at full power, but when I gave a it a lot of gas I was able to roll out and from there it was fine. Thanks for the help guys, ( I hope I am not stupid enough to have it be something so simple-but maybe I am).
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Biff-a-nator
KLX 250S
5
04-02-2011 07:41 PM
chik636rydr
Off Topic
24
06-05-2010 05:48 AM
coopers2k
General Tech
10
09-01-2008 07:20 PM
RKLstunt 929
General Tech
2
05-10-2008 10:50 AM
HotSaki
ZZR 600
7
09-26-2007 12:52 AM



Quick Reply: Need some help here....



All times are GMT. The time now is 04:42 AM.