Please help, just bought this ATV and I have problems. 2WD/4WD flashing about 2 seconds. Repair manual states to check the brake actuator. It does test bad. At the same time I tested my 4WD actuator and it tests bad as well!! Could they both have gone bad at the same time? Also the manual says if both are bad my 2WD/4WD lights should be flashing about 4 seconds apart? Dosn't make sense. Dealer is of little help only wants me to bring it in. Other components in system check out OK.

 

I would try replacing the brake actuator first. It could be triggering the 4X error code as well. Just a thought. Try disconnecting them one at a time and see what happens to the error code. Shouldn't hurt anything.
PS, welcome to the forum.

 

Welcome to KF. You have verified the troubleshoot in accordance to your manual. Good luck and again welcome.

 

Welcome to KF, I would just take it in and let them fix it if under warranty. Just my opinion.

 

welcome to KF.

 

welcome to KF yeah I would just take it to the dealer but do one at a time first if your gonna do it yourself