Rode it the first time this saturday, nice bike, keeping it under 4k rpm
is really hard, little bit gas shift little bit gas shift... i showed up at the
mva to take the skills test but they now require appointments

the bike purrs like a kitten, i had a guy from PA driving with me (since
i only have a LP), his KTM was so loud i couldn't hear my bike at all

i can't wait to get the license, i wanna riiiiiiiide

anyone got tips where in the us i can get fiberglass, the goods stuff,
not the advanceautoparts "try to fix your car" stuff?

i had some sweet ideas last night

 

fiberglass??? what would you do with fiberglass?

 

You know you don't have to baby it, don't you ?


http://www.mototuneusa.com/break_in_secrets.htm

 

@lcpl > there are tons of things you can do with fiberglass

@vlodpf > i've heard that from the guy who was riding with me yesterday,
i didn't really break in my old bikes, and never had troubles with them...

i'm sure once i have my license i'll go over 4k rpm every now and then

 

If you ain't going 4k you are either crawling through some tight trailsOr you are following the ridiculous factory break in. I tried that with 2 miles on the clock & would have gotten run over if I continued.

My bike has had the exaust & carb upgraded. It now revs easily to 8k easily & is now what I call snappy!

 

Yeah it does sound like a sewing machine on wheels stock

 

For the good glass stuff go see an autobody wholesaler.I have a local place called Thornton auto works and they special in oldsmobile restorations only.He is also a product wholesaler.
The usual auto parts places have junk.The quality places will be able to sell you the quality 3M products...(ex. Fusor) we use Fusor to attach the fenders to the bare hoods of big rigs (yep that's all that holds them on!)
Just google MSF class and you will get results for the info you want for the class.
here ya go...I'll put the link at the bottom...hope it works.
RiderCourse Info Library/Safety Tips Host an Event MSF News MSF Products RiderCoach Info Training Site Support State Laws and Reports Donate to NMSF Contact MSF Home /RiderCourse Locations RiderCourse Locations
With over 1500 RiderCourse sites throughout the United States, there's probably one near you. Some points to consider when selecting a Training Site: [ul][*]The MSF Basic RiderCourse is designed as a 15-hour curriculum that takes place over a few days or consecutive weekends. However, some locations listed here add additional modules of instruction/discussion that lengthen the class.[*]Most locations issue an MSF RiderCourse Completion Card. Upon successful completion of the RiderCourse, some states, not all, will waive the on-bike riding skills test and/or the written test required to obtain your motorcycle operator's license or endorsement.[*]Please note that many states will not accept an MSF RiderCourse Completion Card issued from another state or from the Military. [/ul]Be sure to ask the Training Site you've selected about these details before you enroll in a RiderCourse.
State ALASKA ALABAMA ARKANSAS ARIZONA CALIFORNIA COLORADO CONNECTICUT DISTRICT OF COLUMBIA DELAWARE FLORIDA GEORGIA HAWAII IOWA IDAHO ILLINOIS INDIANA KANSAS KENTUCKY LOUISIANA MASSACHUSETTS MARYLAND MAINE MICHIGAN MINNESOTA MISSOURI MISSISSIPPI MONTANA NORTH CAROLINA NORTH DAKOTA NEBRASKA NEW HAMPSHIRE NEW JERSEY NEW MEXICO NEVADA NEW YORK OHIO OKLAHOMA OREGON PENNSYLVANIA RHODE ISLAND SOUTH CAROLINA SOUTH DAKOTA TENNESSEE TEXAS UTAH VIRGINIA VERMONT WASHINGTON WISCONSIN WEST VIRGINIA WYOMING Armed Forces Americas (AA) Armed Forces Europe (AE) Armed Forces Pacific (AP) (Sort your results by City/Zip/County by clicking on the corresponding column heading) Locations 14 Record(s) Found Site Website City Zip County Email Phone College of Southern Maryland View LA PLATA 20646 CHARLES
(301) 934-7526 LAUREL MALL-FRONT PARKING LOT View LAUREL 20707 PRINCE GEORGE'S
(301) 575-0575 PRINCE GEORGE'S COMMUNITY COLLEGE View LARGO 20774 PRINCE GEORGE'S ClickHere (301) 322-0650 Installation Safety Division (H. Mike Allen)
APG 21005 HARFORD ClickHere (410) 306-1081 HARFORD COMMUNITY COLLEGE View BEL AIR 21015 HARFORD
(410) 836-4376 GLEN BURNIE MVA View GLEN BURNIE 21062 ANNE ARUNDEL ClickHere (800) 638-1722 HARLEY-DAVIDSON OF MARYLAND
ELKRIDGE 21075 HOWARD
(410) 796-1044 Harley Davidson of Annapolis (RIDER'S EDGE CENTER) View ODENTON 21113 ANNE ARUNDEL
(410) 263-3345 THE HARLEY-DAVIDSON STORE OF BALTIMORE View MIDDLE RIVER 21220 BALTIMORE
(410) 238-2003 ALLEGANY COLLEGE OF MARYLAND View CUMBERLAND 21502 ALLEGANY
(301) 784-5341 FREDERICK MVA View FREDERICK 21701 FREDERICK
(800) 638-1722 HAGERSTOWN MVA View HAGERSTOWN 217408902 WASHINGTON
(301) 790-2800 SALISBURY MVA View SALISBURY 21801 WICOMICO
(800) 638-1722 CECIL COMMUNTY COLLEGE
NORTHEAST 21901 CECIL
(410) 287-6060



ATTENTION SPONSORS: Update information on this page by logging into RETSORG and modifying your profile. http://nm.msf-usa.org/msf/ridercourses.aspx

This is the MD. class deal.

 

@vlodpg> problem is the speedlimit was only 35, so i couldnt really
go much faster than 40-45... thats about 4k rpm... i'll make sure the
engine warms up and than i'll give it some more...

its hard though, maryland just got hit by icerain...i hope the weekend
will be ok, i wanna riiiiiiiiiiiide, only 14 miles so far

i'll order the FMF pipe for the 250s, i guess 350 isn't bad for a slipon
and the dynosheets i saw don't look bad at all, what else would i have
to change? rejet?

The DBs shouldn't be alot higher too...


@skylinegtst > thats true, i don't wanna give the other ppl in my community
a hard time but i bike has to sound better than a scooter with a hole in the exhaust


@ Truckman > Thank you, i uses wigopal products in austria (20 kg barrels) and
also their gel and topcoats

i got an appointment at the mva on thursday, hopefully the weather will
be ok, the long weekend is coming, i HAVE to be ready if it clears up...