Hi there, ive recently acquired a 1990 zx6d or zzr600, it worked and ran back in the summer but i brought it home and noticed some wiring problems. So of course i replaced the harness, regulator, cdi, junction box and most all the relays and now it wont get power to the switch. ive been tracing wires for a week and have gotten nothing more than a headache :/ I have a hanes manual but im no good at reading wiring diagrams soooo its not really helping too much... Just thought i would ask around here for some tips or if anyone knew what wires are supposed to be hot to the switch from the junction box or wherever it comes from. Thanks for any help you can give.

 

power from the bat to the junction box through the starter relay and back out via the R/Y wire to the solenoid, the white wire in the 3rd slot on the solenoid is supposed to send power to the rest of the bike... right? it goes back to the j-box and to the ignition connector, from what i can tell anyway. jumped the yellow and brown, got the fuel relay working as well as the warning lights so i know all that is functioning. but i dont know what all is supposed to be hot and what isnt. >.< Help in any way would be amazing lol

 

Welcome to KF

Here is a pic from my factory manual.