The Stunters Corner For all those stunters out there.. share your knowledge, talk about it. Those that do not like stunting, please stay away.

First wheelies

Thread Tools
 
Search this Thread
 
  #1  
Old 08-18-2007, 12:58 AM
Deuce's Avatar
Senior Member
1st Gear Member
Thread Starter
Join Date: Jun 2007
Location:
Posts: 524
Default First wheelies

So, I did my first few wheelies not long ago.. Mostly in 1st gear, but I don't know how I'm going to be able to ride it out in 1st. I'm too jittery because I'm still nervous when I get up that high and the throttle's too jittery to control when I'm jittery. lol Still getting used to it. Only pulling them at night when there aren't any other cars on the road. But, it's alot of fun and I'm looking forward to being able to ride them out. Any tips on a good speed to attempt pulling them in 2nd gear? 1st I'm doing about 20 mph.
 
  #2  
Old 08-18-2007, 02:29 PM
Notstock's Avatar
Super Moderator
Join Date: Jun 2005
Location: So Cal
Posts: 7,044
Default RE: First wheelies

2nd gear about 20-25, quickly close throtlte and let the front compress then quickly open throttle.

Good luck and becarefull, I still suck at wheelies [&o]and can appreciate the foos who can get them up and ride them out.
 
  #3  
Old 08-18-2007, 11:27 PM
OMalley912's Avatar
Senior Member
1st Gear Member
Join Date: Apr 2007
Location: Gibsonia PA
Posts: 2,317
Default RE: First wheelies

Don't forget to position your foot on the rear brake just in case you get up.....way up! Smack that brake and not your head
 
  #4  
Old 08-19-2007, 02:25 AM
Dragone#19's Avatar
Administrator
1st Gear Member
Join Date: Nov 2005
Location: The Silver State
Posts: 18,288
Default RE: First wheelies

ORIGINAL: OMalley912

Don't forget to position your foot on the rear brake just in case you get up.....way up! Smack that brake and not your head
hahaha, an aquaintance of mine looped his '06 GSXR 1k not too long ago at around 80mph 2nd gear doing that bounce/fork compression thing. Covering the rear brake is a good thing!
 
  #5  
Old 09-03-2007, 11:49 PM
j0304636's Avatar
Junior Member
Join Date: Sep 2007
Posts: 13
Default RE: First wheelies

It all depends on what your riding. when my 636 was stock I had to get it up to 45-50 mph and hop it in order for it to get up in 2nd gear.now if you use the clutch its a total different story. remember, the faster you go the less forgiving the pavement is. My suggestion, find a big parking lot and get your first gears down first so you get used to the bikes balance and the rear brake incase you have to hit it. around here we have an industrial park that has a nice flat road and no cars after 5pm. if you can find one around you I bet youll find more bikes there practicing and I'm sure they can give you advice.
 
  #6  
Old 09-19-2007, 01:38 AM
Triggs's Avatar
Member
Join Date: Sep 2007
Location:
Posts: 30
Default RE: First wheelies

I almost lost it earlier. I'm pretty new too and I've mainly been powering it up. The other day on the inerstate I got stuck in heavy traffic so I was practicing clutching it up and I was doing alright at it.. So earlier today my friend and I were riding and he asked to see me pop a wheelie which kinda made me nervous.. So my first attempt I let out on the clutch a bit too slow and it only got an inch or two off the ground so he laughed. I guess it was kinda one of those "i'll show you not to laugh at me" kinda things so I cranked it up a wee bit too high and got almost vertical (which I wasn't expecitng) and when it came slamming down I kinda fell forward and ALMOST lost control. I didn't though. Live and learn, I guess.
 
  #7  
Old 09-19-2007, 01:47 PM
hoedogg's Avatar
Administrator
1st Gear Member
Join Date: Feb 2006
Location: bay area cali
Posts: 17,484
Default RE: First wheelies

remember peeps with wheelies comes blown fork seals
 
  #8  
Old 09-20-2007, 01:37 AM
Dragone#19's Avatar
Administrator
1st Gear Member
Join Date: Nov 2005
Location: The Silver State
Posts: 18,288
Default RE: First wheelies

blown seals and cracked ram air tubes.
 
  #9  
Old 09-20-2007, 10:52 AM
rocketrotary's Avatar
Senior Member
1st Gear Member
Join Date: Apr 2007
Location: Ft. Gordon (Augusta) GA
Posts: 8,268
Default RE: First wheelies

And possibly cracked vertabrae
 
  #10  
Old 09-20-2007, 10:55 AM
rocketrotary's Avatar
Senior Member
1st Gear Member
Join Date: Apr 2007
Location: Ft. Gordon (Augusta) GA
Posts: 8,268
Default RE: First wheelies

Don't get me wrong, I'm not saying don't do wheelies. They are a lot of fun. Just be careful.
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
murphmaster5
Ninja ZX-6R & ZX-6RR
5
11-15-2006 09:49 PM
murphmaster5
Ninja ZX-6R & ZX-6RR
30
03-25-2006 02:36 PM
MK1gti20v
Ninja ZX-6R & ZX-6RR
5
10-13-2005 03:52 PM
lawman118
Ninja ZX-6R & ZX-6RR
10
06-26-2005 08:37 AM
reaper
Ninja ZX-6R & ZX-6RR
8
06-24-2005 07:24 PM



Quick Reply: First wheelies



All times are GMT. The time now is 12:30 AM.