PROBLEMS...PLEASE TAKE A LOOK

Reply Subscribe

Thread Tools

Search this Thread

May 21, 2007 | 04:52 AM

#11

Dragone#19

Administrator

Joined: Nov 2005

Posts: 18,288

From: The Silver State

1st Gear Member

RE: PROBLEMS...PLEASE TAKE A LOOK

Quote:

ORIGINAL: speedracer138

You may want to check for wires touching your exhaust also; The exhaust could have melted through the plastic & wiresunder your seat. They may be resting against the pipe, melted & shorted to ground.

Speed, if the complete check was done, I would think that would have been spotted. Hint Hint again!

edit: My spelling sucks

May 21, 2007 | 05:26 AM

#12

speedracer138

Senior Member

1st Gear Member

Joined: Mar 2006

Posts: 4,242

From: Keller (DFW), Texas

1st Gear Member

RE: PROBLEMS...PLEASE TAKE A LOOK

Quote:

ORIGINAL: Dragone#19

Quote:

Speed, if the complete check was done, I would think that would have been spotted. Hint Hint again!

edit: My spelling sucks

You can never be too certain. I'm sure something is shorted although it is possible the ECU could be bad.You can always get a cheap used one off ebay and try it out. If you get a used ECU, get one off a ZX6RR; Part number 21175-0066. It has a higher redline cutoff and may evenhave more timing advance programmed in.

May 21, 2007 | 01:13 PM

#13

mikedrinfla

Senior Member

1st Gear Member

Joined: Nov 2006

Posts: 1,456

From: In the BURG

RE: PROBLEMS...PLEASE TAKE A LOOK

The zx6rr ecu will just replace the zx6r ecu with no problems I might have to try that. Will I have to re do my power comander map? And if so which one do I have the mapped made for zx6r or zx6rr?