97 zx6? help and or suggestions,please

Thread Tools
 
Search this Thread
 
Old Aug 18, 2007 | 05:42 PM
  #1  
jar75's Avatar
Thread Starter
|
Junior Member
Joined: Aug 2007
Posts: 7
Default 97 zx6? help and or suggestions,please

Hey Guys, I pretty much did a copy and paste from my " New guy introduction" post: Here it goes.
After 17 years of not riding Kaw's(82 k440)im back with a ninja project and in need of some help. Years have gone by and have been through Honda's, Yam's, Zook's but never done a Ninja project so here we go!

After hounding my "friend" for years to give me back my $1000.00 that i loaned him many years ago he decided to give me a supposed ex doug polenzx6rracebike which my friend used to race with . Funny i dont rememberPolenracing a 6 and this guys a prettygood story fabricator but???I saw my friend at the track a long time ago with this bike an i know it moves so when he said "here take this old zx since i owe you money and shut up!". Well i did and finallly looking it over to convert i back to street as well as the ocassional trackday bike but running into probs.

First off : Salvage titled frame, yeah, cant use that on the street here in Illinois! I had the Vin run and comes back no record with Secretary of State. If a vehicle hasnt been registered within 7years here the info is purged from the system and you have to know all info exactly to retitle it.

Second: really didnt know what year it was since everything is rattlecan flat black and the only thing i have to go by is the vin and motor number. According to theWiki that the VIN (JKAZX4F17VA03XXXX) is a 1997ZX600. Dida search and found that the framelooks like mine but when searching ebayfound all othe ZX frames to be a separate frame and rear subfame. This one is a solid welded frame and rear subframe. Was this the onlyyear that they did this?
What im mainly looking for is to finda frame thati will be able to swap over the motor, suspension and wiring over without any mods. It currently has no plastics,tank or guages but i can retro a newer set of race plastic on it with a piaaheadlight for the street. I guess i just need to know what are my options with this pile of parts before i get crackin and find out it was a bigger waste of money.

Guess my other alternative is to part it out andhopefully make my money back.

Anyone have any answers to this dilemma? I will post some pics latersoyou can see what im dealing with.If anyone has any info it would be great! I will take a pic or two of what i have hopefully tomorrow.

The following pic is from what i found from the Wiki and this is the same style frame that i have but in rattlecan flat black.

[IMG]local://upfiles/6834/AF02A4B2870D48D68C0038697500EA2B.jpg[/IMG]
 
Old Aug 21, 2007 | 04:58 AM
  #2  
speedracer138's Avatar
Senior Member
1st Gear Member
Joined: Mar 2006
Posts: 4,242
From: Keller (DFW), Texas
1st Gear Member
Default RE: 97 zx6? help and or suggestions,please

Keep it as a track or stunt bike. Doug Polen Huh? That guy was one of the best racer's in the world! If that washis bike, that's pretty awesome!
 
Old Aug 21, 2007 | 02:20 PM
  #3  
hoedogg's Avatar
Administrator
1st Gear Member
Joined: Feb 2006
Posts: 17,484
From: bay area cali
Default RE: 97 zx6? help and or suggestions,please

ive got a suggestion, sell that bike to meill give ya $1001 for it
 
Old Aug 30, 2007 | 02:02 AM
  #4  
recker59's Avatar
Junior Member
Joined: Aug 2007
Posts: 9
Default RE: 97 zx6? help and or suggestions,please

new here haven't hit the into page yet. did a search and found this post. i just came across a 97 also. i don't know anything about it, but it was free. It say's its a zx6 but thats about all i know. i just drained the gas cleaned the carbs but it needs a new battery. what should i do with this thing?

[IMG]local://upfiles/6969/6F7C89FE4C4C4FF08404E195B3A1BC02.jpg[/IMG]
 
Old Aug 30, 2007 | 02:22 AM
  #5  
speedracer138's Avatar
Senior Member
1st Gear Member
Joined: Mar 2006
Posts: 4,242
From: Keller (DFW), Texas
1st Gear Member
Default RE: 97 zx6? help and or suggestions,please

Put some fresh gas in, drain the carbs through with fresh gasagain and change the oil & filter. Then try to start it and see what happens. How long was it sitting and the last time it ran?
 
Old Aug 30, 2007 | 02:29 AM
  #6  
recker59's Avatar
Junior Member
Joined: Aug 2007
Posts: 9
Default RE: 97 zx6? help and or suggestions,please

did all that. it runs i just have to jump it everytime. it needs front brake fluid besides that i think it is road worthy. it's pretty dirty so i think it's sat for a while. here's a bigger pic

[IMG]local://upfiles/6969/B1305F73E9644803BD0DCC57AD2E2045.jpg[/IMG]
 
Old Aug 30, 2007 | 02:35 AM
  #7  
speedracer138's Avatar
Senior Member
1st Gear Member
Joined: Mar 2006
Posts: 4,242
From: Keller (DFW), Texas
1st Gear Member
Default RE: 97 zx6? help and or suggestions,please

Get a new battery and start washing/ cleaning. They are great sport touring bikes. I remember when this model first came out in 88. It was huge compared to the 85-87 it replaced but it was fast as HELL! Lot's of power!
 
Old Aug 30, 2007 | 02:37 AM
  #8  
Dragone#19's Avatar
Administrator
Joined: Nov 2005
Posts: 18,288
From: The Silver State
1st Gear Member
Default RE: 97 zx6? help and or suggestions,please

New battery time then?
 
Old Aug 30, 2007 | 02:38 AM
  #9  
recker59's Avatar
Junior Member
Joined: Aug 2007
Posts: 9
Default RE: 97 zx6? help and or suggestions,please

yeah it needs a bath, and i'll get a battery soon maybe tomorrow. my problem is i know nothing about it. is it worth some work or should i just ride it to the ground?
 
Old Aug 30, 2007 | 02:49 AM
  #10  
Dragone#19's Avatar
Administrator
Joined: Nov 2005
Posts: 18,288
From: The Silver State
1st Gear Member
Default RE: 97 zx6? help and or suggestions,please

ORIGINAL: recker59

yeah it needs a bath, and i'll get a battery soon maybe tomorrow. my problem is i know nothing about it. is it worth some work or should i just ride it to the ground?
Take care of the ride or it will "run you into the ground"
 



All times are GMT. The time now is 01:57 AM.