Which year model to choose?
Senior Member
Joined: Sep 2009
Posts: 5,050
From: Abilene, TX
1st Gear Member
One other thing I like about the '06/'07 is that you can use some of the aftermarket products made for the KLX300...suspension tuning parts, Acerbis 3.7 tank, etc. somewhat easier than the '09 and later models.
Senior Member
Joined: Apr 2016
Posts: 389
1st Gear Member
Donning my flame resistant suit before relaying this message... one of my friends recently said that the newer model KLX250S look too much like a China bike, and liked the looks of the older KLX250S a lot more.
Senior Member
Joined: Oct 2010
Posts: 4,507
From: SW Idaho
1st Gear Member
I agree.
Senior Member
Joined: Oct 2014
Posts: 292
From: Taiwan
1st Gear Member
Damn, I should always go back to re-read original posts after a few days b4 replying. Thought he was only asking about the engine. 
Just clarifying, there were significant changes from first (06=07) to second generation (09-14):
- Plastic (including front/rear fenders, radiator shrouds, side panels and headlight shell)
- Speedometer (second gen has a digital unit)
- Forks (second gen has less travel and shorter overall length)
- Shock (ditto forks)
- Linkage pull rods (first gen: 117mm, second gen: 119mm. longer = shorter ride height)
- Overall appearance became less like the original KLX250R/300R with the second gen KLX250S.
- Second gen came in two colorways: lime/black and red/black
Thread
Thread Starter
Forum
Replies
Last Post
