does this fan ever work?

Thread Tools
 
Search this Thread
 
  #21  
Old 08-24-2016, 10:03 PM
Anthony LaGrasta's Avatar
Senior Member
1st Gear Member
Thread Starter
Join Date: Apr 2016
Location: Mission Viejo, CA
Posts: 153
Default

Back from a 50 mile off road trip, included sand and there it was, a spinning fan! I can now confirm it works, when needed, and that's not very often.
Someone mentioned being able to hear it whenever it turns on, this is true.
 
  #22  
Old 08-24-2016, 11:38 PM
Dash8's Avatar
Senior Member
1st Gear Member
Join Date: Jul 2015
Location: Milton Ont Canada
Posts: 302
Default

Mine comes on, with the 351, on the trails. Temps here are much hotter than normal, and the fan comes on fairly regularly. Hard to tell it's on, tho, it's so quiet
 
  #23  
Old 08-25-2016, 02:59 PM
TNC's Avatar
TNC
TNC is offline
Senior Member
1st Gear Member
Join Date: Sep 2009
Location: Abilene, TX
Posts: 5,050
Default

I also added a manual switch to provide an additional option in certain situations. I have a Trail Tech Vapor instrument panel which has a very accurate digital temp gauge. I usually hit the fan button in certain situations when the temp crosses 200 degrees. I've noticed on a long, hard climb on a trail where you're wailing on the bike, for example, that heat soaking is harder to overcome when you wait for the fan temp to kick the fan in. I don't think you're going to encounter engine damage relying the high temp fan switch, but I like keeping temps controlled at a slightly lower point...just my preference.

On the discussion about hearing the fan, I can always feel the effects of the fan blowing hot air on my right leg, even through riding pants. The cooling system on the KLX is very effective. Thank you, Kawasaki.
 
  #24  
Old 09-11-2016, 12:00 AM
Houstons4's Avatar
Member
1st Gear Member
Join Date: Aug 2016
Location: NE Ohio/Northern Michigan
Posts: 49
Default

Thanks for this thread. While adjusting my mixture screw today at idle in 88deg temps, my temp light came on but no fan. After reading this post, I inspected my fan closer to find a very slight bend in the mount causing the bottom of the fan to be slightly press against the radiator. A slight adjustment freed than fan which I anticipate will do the trick!
 
  #25  
Old 09-11-2016, 09:42 PM
Houstons4's Avatar
Member
1st Gear Member
Join Date: Aug 2016
Location: NE Ohio/Northern Michigan
Posts: 49
Default

While adjusting the mix screw again today, temp light came on just as I was about to take a quick test ride. No fan?
 
  #26  
Old 09-12-2016, 04:15 AM
Dash8's Avatar
Senior Member
1st Gear Member
Join Date: Jul 2015
Location: Milton Ont Canada
Posts: 302
Default

Originally Posted by Houstons4
While adjusting the mix screw again today, temp light came on just as I was about to take a quick test ride. No fan?
I had (hope it's fixed) the same problem, temp light came on before the fan... I replaced the fan sensor, thermostat and coolant (with moto cool), and now it operates normally, fan comes on, and light never comes on..
 
  #27  
Old 09-17-2016, 11:32 PM
Houstons4's Avatar
Member
1st Gear Member
Join Date: Aug 2016
Location: NE Ohio/Northern Michigan
Posts: 49
Default

The fan has not been operating at all, found a blown fuse for the coolant fan. Hopefully this will remedy situation time will tell.

Tested fan, comes on intermittently removing hot air effectively. Temperature light did not come on at all after lengthy idle. Problem solved.
 

Last edited by Houstons4; 09-18-2016 at 07:30 PM.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
CousinLarry
KLX 250S
35
07-03-2012 02:30 AM
glarkin
General Tech
2
09-22-2008 05:09 PM
LordVngr
KLX 250S
10
08-01-2006 12:48 PM



Quick Reply: does this fan ever work?



All times are GMT. The time now is 12:41 AM.