06 klx250s electrical issues

Old May 14, 2017 | 01:45 AM
  #1  
ramsey.mangus's Avatar
Thread Starter
|
Member
Joined: Oct 2016
Posts: 42
1st Gear Member
Lightbulb 06 klx250s electrical issues

https://www.youtube.com/watch?v=LMMg...ature=youtu.be


Right-side front and rear turn signals DONT work

Left-side, only front signal works... blinks rapidly.

When attempting to turn on right hand signals, dashboard lights momentarily "Phase out" for a split second.

Headlight is non-functional.

Tail-light & brake light works.

Have already replaced a yellow fuse. (Numbered "20")... No effect.


Turn signals worked before going riding one day, didn't work after.. the headlight has been dead for awhile..

When I installed the aftermarket signals you see in the back, all the lights WORKED, but still blinked rapidly.. hmm..
 

Last edited by ramsey.mangus; May 14, 2017 at 01:48 AM.
Old May 14, 2017 | 02:52 AM
  #2  
outrecording's Avatar
Senior Member
Joined: Oct 2014
Posts: 292
From: Taiwan
1st Gear Member
Default

Originally Posted by ramsey.mangus
https://www.youtube.com/watch?v=LMMg...ature=youtu.be


Right-side front and rear turn signals DONT work

Left-side, only front signal works... blinks rapidly.

When attempting to turn on right hand signals, dashboard lights momentarily "Phase out" for a split second.

Headlight is non-functional.

Tail-light & brake light works.

Have already replaced a yellow fuse. (Numbered "20")... No effect.


Turn signals worked before going riding one day, didn't work after.. the headlight has been dead for awhile..

When I installed the aftermarket signals you see in the back, all the lights WORKED, but still blinked rapidly.. hmm..
Check to see if the non-blinking front light bulb is out. When I made up some diy removeable turn signals, if I removed one signal and turned them on, the others would blink real fast.

When you installed the new rear signals, (I'm assuming they're LED?) did you also install a load resistor or something similar? That would explain why they were flashing fast from the beginning.
 
Old May 14, 2017 | 02:53 AM
  #3  
ramsey.mangus's Avatar
Thread Starter
|
Member
Joined: Oct 2016
Posts: 42
1st Gear Member
Default

Originally Posted by outrecording
Check to see if the non-blinking front light bulb is out. When I made up some diy removeable turn signals, if I removed one signal and turned them on, the others would blink real fast.

When you installed the new rear signals, (I'm assuming they're LED?) did you also install a load resistor or something similar? That would explain why they were flashing fast from the beginning.
I didn't install anything of the sort. x_x
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
calchef
General Tech
1
May 16, 2013 03:26 AM
grady1966
General Tech
0
Jun 8, 2011 06:01 PM
Pastor Dude
1500 Classic, 1500 Drifter, & 1500 Nomad
3
Jul 7, 2009 06:36 PM
bumpy
KLR250
3
Dec 19, 2007 10:47 PM
smokeater3194
General Tech
3
Jul 26, 2005 03:45 AM


Thread Tools
Search this Thread

All times are GMT. The time now is 06:37 PM.