zx6r high mph problem
i have a zx6r 98 when im in first and second gear and full throttle its fine as soon as i get in third or fourth about 120 mph it bogs right down like to much fuel but i dont under stand why does anyone know of any problems like this
and now for an explaination as to why i say this. cuz i'm bored
at W.O.T., intake velocities are approximately 120MPH, therefore, at such speed, the ram air starts to create positive air pressure on the carbs and airbox. a vac line leak will pressurize the float bowls unevenly in the carbs and result in a lean condition. bet ya dollars to dounuts it backfires like a MF'er when you're at speed, and it stumbles a bit at moderate-speed heavy acceleration? (around 60-90mph, 5th and 6th gear roll-ons..)
at W.O.T., intake velocities are approximately 120MPH, therefore, at such speed, the ram air starts to create positive air pressure on the carbs and airbox. a vac line leak will pressurize the float bowls unevenly in the carbs and result in a lean condition. bet ya dollars to dounuts it backfires like a MF'er when you're at speed, and it stumbles a bit at moderate-speed heavy acceleration? (around 60-90mph, 5th and 6th gear roll-ons..)
Thread
Thread Starter
Forum
Replies
Last Post
punkenduro09
KLX 250S
12
Dec 8, 2014 08:28 AM
Nickawasaki
General Tech
3
May 20, 2011 12:55 AM




