07 zx 10r , mph is fluctuating, digital speedo
#1
07 zx 10r , mph is fluctuating, digital speedo
i have a 07 zx 10r and my problem is i have a digital speedo and the mph is fluctuating ( when i feel like im doing 25mph it reads 0 when i feel like im doing 90 it reads 45) every other fuctions work
i'm thinking the sensor is dirty on the wheel but dont know where it is
if anybody can help id appreciate it
it kind of sucks if its something serious cause my warrenty was up last month
thanks to all who read
i'm thinking the sensor is dirty on the wheel but dont know where it is
if anybody can help id appreciate it
it kind of sucks if its something serious cause my warrenty was up last month
thanks to all who read
#3
edit:
oops, I have seen it here: http://kawispeed.com/viewtopic.php?f=20&t=93
and here: http://zx-10r.net/forum/showthread.p...hlight=manuals
Welcome to KF
oops, I have seen it here: http://kawispeed.com/viewtopic.php?f=20&t=93
and here: http://zx-10r.net/forum/showthread.p...hlight=manuals
Welcome to KF
Last edited by Dragone#19; 08-15-2008 at 12:08 AM.
#4
thanks a million
edit:
oops, I have seen it here: http://kawispeed.com/viewtopic.php?f=20&t=93
and here: http://zx-10r.net/forum/showthread.p...hlight=manuals
Welcome to KF
oops, I have seen it here: http://kawispeed.com/viewtopic.php?f=20&t=93
and here: http://zx-10r.net/forum/showthread.p...hlight=manuals
Welcome to KF
i went to the dealership my warranty was up last month so i found the speed sensor through a parts diagram online its on the crankshaft so i have to take the tank, air ram seat off just to get to that 1 bolt
again thanks a million
#5
but what do you expect for buying a rocket to do the speed limit ha ha
#7
Hold on, what does the crankshaft have to do with MPH??? NOTHING!!!!
The sensor is inside the front sprocket cover. That's where all the new bikes have 'em
Lack of chain lube, results in metal shavings collecting on magnetic sensor, and closing the clearance to the sprocket. = Bad reading.
The sensor is inside the front sprocket cover. That's where all the new bikes have 'em
Lack of chain lube, results in metal shavings collecting on magnetic sensor, and closing the clearance to the sprocket. = Bad reading.
#8
thanks to all who helped i fixed the problem dont know what i did but i trying to get the speed sensor out without taking the tank and everything else off but was only able to take the wire connection off so i put it back on the next day i used the bike it was now working go figure
but thanks again to all
but thanks again to all
Thread
Thread Starter
Forum
Replies
Last Post