Ok first off I am new to this forum so I am sorry if this has been already been covered. I have heard of a few things I can do to get some more power out of it, the first is I have heard about a way to jump programs to get it to the european version which has 5 more horse power. The second thing is I have a cali bike and want to know how and what I can take off to get rid of the smog stuff. Is there anything else easy to do to it? I have a power commander and akraprovic evolution exhaust on the way.

 

do a search for ECU mod in the ' SEARCH ' section at the top of the page .It adds hp on the topend above 13,000 rpm's

 

If you are getting a full exhaust headers, mid pipe, and can the cat, and back pressure servo will be gone. I believe that Caili bikes have a CO canister also. That should be easy enough to disconnect. Do a search for it. I think there was a thread about the CO can. There is an old racer saying "more cold air equals Horse Power" The more air you can move through the system in, and out will make for better performance.

 

Im not sure aboutthe 07 but theres full instructions for the 05-06ecu fix on I-hacked.com , maybee that will help you figure it out.

 

Thanks guys I will look all of that up. I have my bike apart to paint it and just want to do as much as possible to get the power up.

 

Welcome to the forums.
You have a link shino on that cannister?

 

where abouts in cali are you ?

 

I dont know what that is on the cannister? Maybe? Im hopefully haveing someone help me get rid of all the unwanted weight and parts but wanted to know if there was anything else that I should do to it since it is all apart.