Hey all. I want to lower the rear end of my bike. I mean I want the tail closer to the rear tire. I've already lowered, or taken as much tension, off the spring/shock as possible, but wnt it lower now. WHY? Stand it up easier, don't mash my nuts into the tank as much, and just to have a different look. So if anyone knows how to accomplish this task i would greatly appreciate the advise.

 

I have a dog bone on my bike, it's lowered an inch. My guy friend love when they get on my bike because like you said, my bike is not a nut cracker.

You can find one anywhere. Unless you can find it cheaper, JC Whitney has then pretty cheap.

http://www.jcwhitney.com/autoparts/P...000105/c-10111



[IMG]local://upfiles/351/617D64B84F4948AB8AD36BE27CFC410D.gif[/IMG]

 

one thing about lowering the bike is that you will not be able to role it into the turns a much as you would with stock hight.. yo will be scraping the foot pegs a lot

 

that is true. especially if you are used to the stock height. and lowering it too much is definetly not good for the bike. (bad ride).

 

i didnt lower mine much at all, and i dont care for it too much at all. when i ride someone, it scrapes all the time going into a corner...