I took the plunge on a mikuni TM36-68 and I'm wondering what I'm up against installation wise and tuning it after. Like how is it set right out of the box, planning to run it with an open air box and a removed butt plug, trying to save some side cash for a big gun header and muffler setup. Sry, 3 post in a week, I'm just excited about my new project.

 

Go look in the KLX250 forum, there are several posts there and they apply to the 300 because several riders are running 300 top ends, including one I know has the 36 - TNC. Look down the list of threads.

 

Go look in the KLX250 forum, there are several posts there and they apply to the 300 because several riders are running 300 top ends, including one I know has the 36 - TNC. Look down the list of threads.

Here is one that was on the topic of stock bore

Here is one from a short cut I posted. Look at post #45