Tail Light System

Thread Tools
 
Search this Thread
 
  #21  
Old 03-24-2009, 03:15 AM
creamcheese's Avatar
Junior Member
1st Gear Member
Join Date: Mar 2009
Posts: 11
Default resistors

Originally Posted by Xplosivo1
I've got the same setup, just waiting to put it on. Did you have to wire in a resitor for the blinkers or are they already done? I looked at the wires and I couldn't see one.
You should not need the resistors to make them work, they will flash at a higher rate,but, I feel it creates more "attention" .
 
Attached Thumbnails Tail Light System-dsc02411.jpg   Tail Light System-dsc02421.jpg   Tail Light System-dsc02419.jpg  
  #22  
Old 12-17-2009, 09:47 AM
barbz's Avatar
Member
1st Gear Member
Join Date: Nov 2009
Location: Brisbane
Posts: 57
Default

I received my edge kit today and noticed the different mounting style of the stick indicator lamps.

Have you got any close up images of how you managed to get them mounted or can you describe it for me?

I like the stock lamps - that is until I rip them off.

Cheers

Paul
________
Extreme Q Vaporizer Best Temp
 

Last edited by barbz; 05-02-2011 at 01:51 AM.
  #23  
Old 12-17-2009, 09:50 PM
punkenduro09's Avatar
Senior Member
1st Gear Member
Join Date: Jul 2008
Location: Murrieta, Ca
Posts: 1,439
Default

i love mine, makes the bike look 100% better.
 
  #24  
Old 12-18-2009, 06:16 PM
skubidoobie's Avatar
Senior Member
1st Gear Member
Join Date: Jul 2009
Location: Hell
Posts: 198
Default

Name:  img042.jpg
Views: 208
Size:  90.9 KB

New and old.
 
  #25  
Old 12-19-2009, 02:33 AM
punkenduro09's Avatar
Senior Member
1st Gear Member
Join Date: Jul 2008
Location: Murrieta, Ca
Posts: 1,439
Default


yes, the plate and the rear fender have been fixed sence then.
 
  #26  
Old 12-21-2009, 01:40 AM
barbz's Avatar
Member
1st Gear Member
Join Date: Nov 2009
Location: Brisbane
Posts: 57
Default

All done



(Picture just because)
________
CHILDREN NEXIUM
 

Last edited by barbz; 05-02-2011 at 01:52 AM.
  #27  
Old 12-22-2009, 04:57 AM
redpillar's Avatar
Senior Member
1st Gear Member
Join Date: Aug 2008
Location: Vancouver Island, British Columbia
Posts: 1,389
Default

Here is what mine looks like now. I lost half of it along with my license plate in Ocotillo Wells. I am going to build a new one and also make a new setup for my Giant Loop bag.

Name:  DSC01237.jpg
Views: 211
Size:  82.3 KB
 

Last edited by redpillar; 12-22-2009 at 05:09 AM.
  #28  
Old 12-24-2009, 04:28 PM
Tmoe's Avatar
Senior Member
1st Gear Member
Join Date: Aug 2008
Location: Colorado Springs, CO.
Posts: 297
Default

I posted about this awhile back, but here goes again.
stock fender after hard ride...
Name:  WTF.jpg
Views: 193
Size:  107.0 KB
what was left of licsense plate...
Name:  liscenseplate.jpg
Views: 181
Size:  110.1 KB
Edge tail light kit for 09 and Procycle turn signals....
Name:  tail24-09.jpg
Views: 196
Size:  72.8 KB
Name:  tail4-25-09.jpg
Views: 171
Size:  87.7 KB
 
  #29  
Old 12-24-2009, 07:15 PM
punkenduro09's Avatar
Senior Member
1st Gear Member
Join Date: Jul 2008
Location: Murrieta, Ca
Posts: 1,439
Default

Originally Posted by redpillar
Here is what mine looks like now. I lost half of it along with my license plate in Ocotillo Wells. I am going to build a new one and also make a new setup for my Giant Loop bag.
sounds just like my story. i was slabing it from the bradshaw trail to ocotillo, then luggage problems (i seam to have that a lot) took out the plate, and turn signal. dirt bikes are better for ocotillo anyways.


on the side of the road, ditching some gear.

but the riding in ocotillo made up for it, it rained the day before so the sand was smooth and pack, oh boy, i was haul *****.
 
  #30  
Old 12-24-2009, 07:18 PM
redpillar's Avatar
Senior Member
1st Gear Member
Join Date: Aug 2008
Location: Vancouver Island, British Columbia
Posts: 1,389
Default

Cool.
 


Quick Reply: Tail Light System



All times are GMT. The time now is 05:25 AM.