New products
Thread Starter
|
Senior Member
1st Gear Member
Joined: Jan 2007
Posts: 287
out with the old, in with the new
I started building my new website tonite.
Here's the new name.
http://bandbmoto.com
It's all the same parts that I've been doing. I hope to make the website easier to navigate.
Here's the new name.
http://bandbmoto.com
It's all the same parts that I've been doing. I hope to make the website easier to navigate.
Last edited by Bake; Feb 17, 2010 at 03:30 PM.
Thread Starter
|
Senior Member
1st Gear Member
Joined: Jan 2007
Posts: 287
WR250R products also
Here are pics of my WR250R products
Skidplate $139
Brake cylinder protector $39
2 gal. Rotopax carrier or 1.5 gal Kolpin jug carrier $149
Luggage plate kit, with 4 spacers and 4 extra long screws, tie down loops, and non-skid surface $75
Skidplate $139
Brake cylinder protector $39
2 gal. Rotopax carrier or 1.5 gal Kolpin jug carrier $149
Luggage plate kit, with 4 spacers and 4 extra long screws, tie down loops, and non-skid surface $75
Last edited by Bake; Apr 22, 2010 at 05:16 PM.
Thread Starter
|
Senior Member
1st Gear Member
Joined: Jan 2007
Posts: 287
I can now reduce the skidplate price by $20. The B and B Moto new price is $155. Our skidplate offers excellent protection and strength.
It is formed from a single piece of 1/8" aircraft grade aluminum sheet. This reinforces the entire skidplate. In an impact, the stress is spread across the plate, not on the weld of an add-on side plate.
The kit includes all fasteners, the 1/8th x 1 inch steel mounting bracket for the front and a new longer engine mount bolt for the steel bracket.
Thanks
It is formed from a single piece of 1/8" aircraft grade aluminum sheet. This reinforces the entire skidplate. In an impact, the stress is spread across the plate, not on the weld of an add-on side plate.
The kit includes all fasteners, the 1/8th x 1 inch steel mounting bracket for the front and a new longer engine mount bolt for the steel bracket.
Thanks
Senior Member
Joined: Mar 2008
Posts: 3,406
From: N. Illinois
1st Gear Member
ha ha well it is a dirt bike, scratches are acceptable. Just chalk it up to character. Dan
Thread Starter
|
Senior Member
1st Gear Member
Joined: Jan 2007
Posts: 287
B and B Moto sale for the 4th of July
Having a sale for the Fourth of July. Buy a new skidplate and get the rear brake protector for just $15. The price has been reduced on the skidplate for the KLX250 to $155. My skidplate is formed from a single piece of 1/8th" aluminum, adding strength over designs with welded on "ears"
B and B Moto no longer charges the 3% Paypal Fee.
Thanks!
Bake
B and B Moto no longer charges the 3% Paypal Fee.
Thanks!
Bake
Thread Starter
|
Senior Member
1st Gear Member
Joined: Jan 2007
Posts: 287
Bump for week 2 of the $15 rear master cylinder protector with each new skidplate.
I've begun work on a front disc protector. I'm in the mock up stage now. I will be making a welded aluminum assembly, not a billet part. My goal is to make it as light as possible, yet still be useful.
I've begun work on a front disc protector. I'm in the mock up stage now. I will be making a welded aluminum assembly, not a billet part. My goal is to make it as light as possible, yet still be useful.
