New bars for a 2009 klx250s
Thread Starter
|
Member
1st Gear Member
Joined: Nov 2009
Posts: 57
From: Brisbane
New bars for a 2009 klx250s
Just wondering what aftermarket bars you have had success in fitting to a 2009 klx250s.
I would ideally like to go to a high rise set but I'm concerned about the cable lengths as the clutch and break wires seem quite taunt.
So what bars have you installed without hassle?
Cheers
________
Lovely Wendie99
I would ideally like to go to a high rise set but I'm concerned about the cable lengths as the clutch and break wires seem quite taunt.
So what bars have you installed without hassle?
Cheers
________
Lovely Wendie99
Last edited by barbz; May 2, 2011 at 01:50 AM.
Junior Member
1st Gear Member
Joined: Sep 2009
Posts: 14
atv mid
hey, just installed a pro taper atv mid bar, perfect for my reach when standing on bike, the sweep is 60 and the rise is bout a inch higher. bar is longer then stock, plan to use all full lenth of bar but when i put back throttle assembly, the cable not long enuff. so i cut the ends to stock length. hope it helps.
Thread
Thread Starter
Forum
Replies
Last Post
will-dakar
KLX 250S
3
Nov 15, 2014 03:59 PM
