LETS POST SOME PIC OF YOUR BAD @$$ KLXs
#721
The windsheild is from an '08 KLR 650. You may be able to find one through that forum or KLR650.net.
#722
Hey Tom, hows it going over there? One of the IT guys that works in our department in Seattle just bought the 09 KLX in green. You find any good spots to ride over there?
#723
Anything special to know about how you mounted it?
#724
There are quite a few logging roads that I like. There is Walker Valley for the more aggressive single track. Snow has limited the riding now.
Last edited by tom edison; 12-22-2010 at 04:25 PM.
#725
I just used a couple of small bolts from my bolt kit. You need to drill the holes for them at a slight angle to match the contour of the screen. I made the holes (on the bike) a little bigger by accident, so I cut a small piece of tube just a little longer than the thickness of the plastic on the shield and made a bushing. I also added acouple of foam blocks to the side to keep the vibration to a minimum. I still need to smooth these out. The top and bottom are notched and held in place by tension.
Have a great Christmas!
Have a great Christmas!
Last edited by tom edison; 12-22-2010 at 04:24 PM.
#727
hello everyone..i'm from Malaysia.
and this is my bike
2007 KLX250 Dtracker
Mods:
K&N AirFilter
KLX300 Jetting kit
KTM Headlight
KTM Supermoto Front Fender
Zeta XC protectors with zeta LED flashers
DRC Edge2 Tail Light
Yoshimura RS2 Exhaust
Renthal Highbend Handlebar
Custom Graphic
Scott Grips with donuts
Zeta ED Skidplate
DRC Silicone Hoses
Zeta Front Sprocket Cover
and this is my bike
2007 KLX250 Dtracker
Mods:
K&N AirFilter
KLX300 Jetting kit
KTM Headlight
KTM Supermoto Front Fender
Zeta XC protectors with zeta LED flashers
DRC Edge2 Tail Light
Yoshimura RS2 Exhaust
Renthal Highbend Handlebar
Custom Graphic
Scott Grips with donuts
Zeta ED Skidplate
DRC Silicone Hoses
Zeta Front Sprocket Cover
#729
as for the DRC Hosekit,u just plug n play.very easy..whatever it is,flush your radiator coolant first k