KLX250S Stalls/Comp Resets/Wont Restart

Thread Tools
 
Search this Thread
 
  #41  
Old 01-28-2013, 09:37 PM
cegusman's Avatar
Senior Member
1st Gear Member
Join Date: Apr 2011
Location: Katy/Houston TX
Posts: 340
Default

Originally Posted by LikesToThump
I have the same problems with misplacing my beer... and it's getting worse too!
Whats worse is when you loose your beer, and yet you find it after looking and it is in your hand.
 
  #42  
Old 01-29-2013, 07:50 AM
linkin5's Avatar
Senior Member
1st Gear Member
Join Date: Sep 2010
Location: Indiana
Posts: 988
Default

A clogged vent line as you discribe it would cause the symptoms you were having. If you open the gas cap that will vent it so if you get it running again that is a quick way to check and see if you have a vent issue.
 
  #43  
Old 01-30-2013, 12:52 AM
jmwoodhouse86's Avatar
Junior Member
1st Gear Member
Thread Starter
Join Date: Sep 2011
Location: Golden, CO
Posts: 18
Default

Thanks for the pep talks guys, I forced myself to give it up for the time being... and after I order a new needle jet, I don't doubt at all that it will end up being easy as pie to get it running again when I come back to it in a few weeks.

It looks like good snow may finally be heading for Colorado though, so I'll have plenty else to focus on!
 
  #44  
Old 01-30-2013, 12:54 AM
jmwoodhouse86's Avatar
Junior Member
1st Gear Member
Thread Starter
Join Date: Sep 2011
Location: Golden, CO
Posts: 18
Default

Originally Posted by linkin5
A clogged vent line as you discribe it would cause the symptoms you were having. If you open the gas cap that will vent it so if you get it running again that is a quick way to check and see if you have a vent issue.
Damn good point... I obviously should have tried that sooner!
 
  #45  
Old 02-17-2013, 06:29 PM
jmwoodhouse86's Avatar
Junior Member
1st Gear Member
Thread Starter
Join Date: Sep 2011
Location: Golden, CO
Posts: 18
Default

WOOOOOOHOOOOOOO, KLX lives again!! I let it sit for a few weeks and ordered the new needle jet that I lost during cleaning. I was already pretty positive that the tank venting issue was the whole problem, probably caused completely by the cocoon, so I went through all of the tank lines once again and blasted them with some air, cleaned out the entire venting system in the cap (even though it seemed spotless). Put everything back together, and BINGO, it fired right up!

All throughout that frustrating process I figured it was going to end up being some stupid simple issue in the end... sure enough! Thanks everyone for all of your help!

CHEERS,
JMW
 
  #46  
Old 02-17-2013, 06:50 PM
Lotrat's Avatar
Senior Member
1st Gear Member
Join Date: Oct 2011
Location: Vista, CA
Posts: 653
Default

I love happy endings.
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
lskreyn3
Kawasaki Jet Ski's
0
09-04-2012 02:21 AM
RandyE
General Tech
1
03-24-2008 11:31 PM
Rusty FJ
KLX 250S
2
03-13-2007 06:26 AM
schnebelen
Kawasaki Jet Ski's
4
06-03-2006 06:52 AM



Quick Reply: KLX250S Stalls/Comp Resets/Wont Restart



All times are GMT. The time now is 09:36 AM.