greasing the swingarm bearings
#1
greasing the swingarm bearings
after all that sand last weekend i'm going out to grease up the bearings. i don't have a shop manual yet so i don't know the torque on some of the bolts. i do have a manual for my kdx. will the torque specs be the same for both bikes? if not i would appreciate someone posting the numbers that i'll need. thanks...
#2
RE: greasing the swingarm bearings
My manuals went with my bike when I sold it, but I made up a little laminated card for quick reference. These should be correct, hopefully someone with a manual can confirm:
swingarm pivot: 88 N-m
rocker arm pivot: 98 N-m
rear shock mounting nut: 39 N-m
tie rod mounting nuts: 81 N-m
swingarm pivot: 88 N-m
rocker arm pivot: 98 N-m
rear shock mounting nut: 39 N-m
tie rod mounting nuts: 81 N-m
#3
RE: greasing the swingarm bearings
ORIGINAL: Nobrakes
These should be correct, hopefully someone with a manual can confirm:
swingarm pivot: 88 N-m
rocker arm pivot: 98 N-m
rear shock mounting nut: 39 N-m
tie rod mounting nuts: 81 N-m
These should be correct, hopefully someone with a manual can confirm:
swingarm pivot: 88 N-m
rocker arm pivot: 98 N-m
rear shock mounting nut: 39 N-m
tie rod mounting nuts: 81 N-m
Thread
Thread Starter
Forum
Replies
Last Post