Hey guys,

Does anyone have the fork oil height spec for the 09 KLX 250s? I just received my Ultra Max valve kit and new springs from John at Moto Pro and I'm without a shop manual...

Thanks guys,

paul

 

Factory service manual

13 - 6 Suspension

Fork Oil Level 101 + or - 2mm (3.98 + or - 0.08 in.) (fully compressed, without fork spring, below from the top of the inner tube)

 

Hey if ya don't mind me asking how much did that run ya for price? And thats just the front right? never got a new rear spring or anything?

 

Usually but not always, the aftermarket valving kit recommends its own oil level to suit their setup. My Race Tech fork revalve had its own spring preload and fork oil level that was a tiny bit different from OEM.

 

Thank you!

I wanted to send the forks & rear shock to John @ Moto-Pro and have him do it all but I need to cut the budget so I'm doing the forks only myself. I'm pretty sure I have the valve installation procedure figured out from hours of studying.. Regarding the price, it really depends on what you need.. Checkout Moto Pro's website or give John a call.

The Moto-Pro instruction sheet stated to use the stock oil level but I think I'll give John a call tomorrow to verify..

Thanks Guys!

Paul