2012 KLX250S Dyno Tuning with Stock Header+DGR Slipon

Thread Tools
 
Search this Thread
 
  #11  
Old 06-07-2015, 03:31 PM
lenman73's Avatar
Member
1st Gear Member
Join Date: Mar 2015
Posts: 33
Default

Well I just pulled the trigger and ordered a dg-r with a 1" quiet insert and a jet kit. I am excited for it to show up and get this on. I ride with three other guys and I am sick of having the quietest bike. Lol. Maybe the lighter weight will help with my crash factor as well. I could be a semi pro dead lifter now I have picked this thing up so many times. Lol I am getting better just a few problem areas on the trails we ride.
 
  #12  
Old 06-07-2015, 05:12 PM
Klxster's Avatar
Senior Member
1st Gear Member
Thread Starter
Join Date: Jun 2013
Location: North Texas
Posts: 3,194
Default

Sounds like you're bout to go from zero to hero.. If you want my assistance with setting up the carb for the DG-R, I'll need to know your elevation(s), and daytime temps and to verify that you have a DJ2152 kit coming.. BTW, if your near sea level, you'll need to call DynoJet and get $6.00 worth of jets coming, DJ136, DJ138, DJ140..

Obviously, the charts and power levels on this thread will directly apply to you if you are near sea level, pull your lid, and leave the 1" insert on a shelf..

Perhaps take the time to go into your profile and list a location as well as create a signature line containing your bikes' information..?
 
  #13  
Old 06-07-2015, 06:07 PM
lenman73's Avatar
Member
1st Gear Member
Join Date: Mar 2015
Posts: 33
Default

Yes. I ordered the 2152. I live in Michigan so I assume its sea level or near. I will update the info when I get home.
 
  #14  
Old 06-07-2015, 06:15 PM
lenman73's Avatar
Member
1st Gear Member
Join Date: Mar 2015
Posts: 33
Default

Just googled it and the mean is 900' above.
 
  #15  
Old 06-07-2015, 06:27 PM
Klxster's Avatar
Senior Member
1st Gear Member
Thread Starter
Join Date: Jun 2013
Location: North Texas
Posts: 3,194
Default

Ok then, you can directly use my charts.. Start, and no doubt end, with 140/2N, lidless, w/o the insert.. Use of the insert will require a "retweak" of my charted setups - use the insert and the lid and you'll be on your own as my data will not apply.
 

Last edited by Klxster; 01-16-2016 at 09:53 PM.
  #16  
Old 06-07-2015, 06:42 PM
Klxster's Avatar
Senior Member
1st Gear Member
Thread Starter
Join Date: Jun 2013
Location: North Texas
Posts: 3,194
Default

Oh, if your summer temps stay above 90F, I'd use next smaller jet (DJ138/2N instead of DJ140/2N)... IMHO..
 

Last edited by Klxster; 01-16-2016 at 09:46 PM.
  #17  
Old 06-07-2015, 07:20 PM
lenman73's Avatar
Member
1st Gear Member
Join Date: Mar 2015
Posts: 33
Default

Awesome. Thank you. I would say the temps will float between 80-90. Sometimes more, sometimes less. What air filter do you use ? I was contemplating the UNI.
 
  #18  
Old 06-07-2015, 07:40 PM
Klxster's Avatar
Senior Member
1st Gear Member
Thread Starter
Join Date: Jun 2013
Location: North Texas
Posts: 3,194
Default

Well, I ran my stock filter until recently. I ran it dry - no oiling. I'm running a UNI, almost dry, right now.. I guess the reputation of the UNI allowing more airflow got my wallet out. I think running the stock filter dry or nearly dry is just fine - as long as it's like new and clean..
 
  #19  
Old 06-07-2015, 07:40 PM
Klxster's Avatar
Senior Member
1st Gear Member
Thread Starter
Join Date: Jun 2013
Location: North Texas
Posts: 3,194
Default

With 80-90F, you have the option of going directly off my charts with your setup. You see, my charts are SAE corrected to 77F, 29.23, 0 humidity..

While 140/5N is too rich, 140/2N should be perfect.. However, please note that I have not yet actually tested 140/2N..
 

Last edited by Klxster; 01-16-2016 at 09:47 PM.
  #20  
Old 09-18-2015, 10:43 PM
Klxster's Avatar
Senior Member
1st Gear Member
Thread Starter
Join Date: Jun 2013
Location: North Texas
Posts: 3,194
Default

Latest news: Neonarc verifies 140/2N (compensated for his 5k altitude) as best power levels overall.. 140/2N at 5k calculated to a DJ132.. So he is running 132/2N..
 


Quick Reply: 2012 KLX250S Dyno Tuning with Stock Header+DGR Slipon



All times are GMT. The time now is 11:08 PM.