Hey guys! Hope all are doing well. I have a 96 Kawasaki zxi 1100. My question is how does the start/stop switch and the master switch get power? I have power to the starter solenoid, but I have no power anywhere else. There is a yellow with red stripe coming OFF of the solenoid running up to the start button. I tested this wire at the first connection off of the solenoid (red 4 pin connector) and there is no power. All the other wires are connected at the wire going to the starter, so I didn't bother testing those. Is this Yellow wire supposed to be hot? Or am I looking in the wrong place? Any information would be helpful. Thanks!