interchangeable foot levers for the zx7r...?
#1
interchangeable foot levers for the zx7r...?
Does anyone out there know if any other ninja's foot levers will interchange with the 96-03 zx7r. i have found a ton of cool aftermarket foot(shift and brake) levers for every ninja except the zx7r, any help would be appreciated. also hand lever interchangeability. my e-mail is zx7rss1@aol.com,
#3
RE: interchangeable foot levers for the zx7r...?
what i'm trying to ask is, not only oem but aftermarket also, for example, will the foot levers for say an 03-04 zx636 fit the 96-03 zx7r? or will the 97-98 zx-11 foot levers fit the 96-03 zx7r? i know that some things are interchangeable,like foot pegs for example, but specifically the 96-03 zx7r foot controls ie: shift and brake lever. i know that there are aftermarket rearsets for the 7r, but i have yet to find aftermarket shifter and brake levers, cycle pirates.com has some bad-*** shift and brake levers, colors and the folding kind, for zx6 636 etc... but not zx7r, if you know of aftermarket shift and brake levers please pass the info my way, i am looking for them in gold, not rearsets, not footpegs, but the shift and brake lever. thanx!
#5
RE: interchangeable foot levers for the zx7r...?
Hm.. i've said this to alot of ppl, sadly.
ZX7-R stuff is becoming impossibly rare.
i make all my own stuff, but thats just me.. i just made a shifter and am working on a set of rearsets now.
i think.. not 100% on this, but i think the zx9-R pegmounts will bolt up.. they look uber close.
good luck on your quest man. welcome to KF!
after turning down the roundstock on a lathe, tapping and knurling...
after mounting on shift lever.. before drilling shift lever and polishing..
ZX7-R stuff is becoming impossibly rare.
i make all my own stuff, but thats just me.. i just made a shifter and am working on a set of rearsets now.
i think.. not 100% on this, but i think the zx9-R pegmounts will bolt up.. they look uber close.
good luck on your quest man. welcome to KF!
after turning down the roundstock on a lathe, tapping and knurling...
after mounting on shift lever.. before drilling shift lever and polishing..
Thread
Thread Starter
Forum
Replies
Last Post
noimad1
KX250 & KX250F
3
07-10-2007 10:37 PM