2005 KDX 220R Help
Thread Starter
|
Junior Member
Joined: Oct 2021
Posts: 2
2005 KDX 220R Help
Any help is greatly appreciated.
My problem is bottom-end torque.
Purchased used and as it stands now:
FMF header and silencer. Turbine core - Header not sure.
Boyesen Rad Reeds
13/47 gearing.
KIPS cleaned and working.
jetting is a 150 and 48
No low-end torque and has a very strong mid and upper.
Any ideas on increasing the low end for tight technical riding.
My problem is bottom-end torque.
Purchased used and as it stands now:
FMF header and silencer. Turbine core - Header not sure.
Boyesen Rad Reeds
13/47 gearing.
KIPS cleaned and working.
jetting is a 150 and 48
No low-end torque and has a very strong mid and upper.
Any ideas on increasing the low end for tight technical riding.
Thread
Thread Starter
Forum
Replies
Last Post
