Hi,


I'm new to this forum and am in need of some help. My 2001 KE100's charging coil is out of ohm tolerance per the service manual. I attempted to rewind the 3 pole stator to no avail. I also reached out to a company in New Hampshire that rewinds coils. They said they have never rewound a KE100 stator. It's listed on their website; but have never attempted one and are not interested in doing so. I watched Kevin Bergeron's videos on how to convert from 6 volt to 12 volt. Very informative videos. I have everything worked out except on how to wire the charging coil. Kevin suggested using a charging coil from a Yamaha moto-4. Part # 55X-81313-MO-00. This coil has 2 yellow wires, 1 green wire and 1 bare wire. There are zero ohms across the 2 yellow wires; but there is continuity across the green wire and the yellow wire on the opposite side of the coil. I texted the guy who made the video; but he told me to watch the video. The coil he uses is not the same one he's recommending. Has anyone out there completed this modification?