Kawasaki Forums
I’m going to try this out to see how it does. Some of those led lights are pretty sweet. I’m sure these won’t work as well as those squadron ights.
I’m going to try this out to see how it does. Some of those led lights are pretty sweet. I’m sure these won’t work as well as those squadron ights.
0 2018/03/26 18:13:02
0 2018/03/26 18:13:10
Got
Got
0 2018/03/26 18:13:13
Found this scavenging the fittings for the ims tank. Makes one wonder if the wire clamps were overlooked or what.
Found this scavenging the fittings for the ims tank. Makes one wonder if the wire clamps were overlooked or what.
0 2018/03/26 19:27:36
Got the dual lights installed.
Got the dual lights installed.
0 2018/03/26 19:27:41
I know led lights work , the lights offered now a days are impressive. It works drawing less watts than the halogens.
I know led lights work , the lights offered now a days are impressive. It works drawing less watts than the halogens.
0 2018/03/26 19:27:45
They weight about the same. The finned auminum housing on the led lights only looks lightweight.
They weight about the same. The finned auminum housing on the led lights only looks lightweight.
0 2018/03/26 19:27:49
Got some stuff done since last Wednesday. 38 pilot jet should be here tomorrow
Got some stuff done since last Wednesday. 38 pilot jet should be here tomorrow
0 2018/03/26 19:27:52
An Adventure tear tack showed up. Not a bad design.
An Adventure tear tack showed up. Not a bad design.
0 2018/03/27 09:16:50
Bolted up sweet n easy
Bolted up sweet n easy
0 2018/03/27 09:16:55
I pulled apart the fcr35 but the float valve needle was stuck inside the seat. Removal was successful after soaking in various products including Coca Cola, pb blaster, wd40, automatic transmission fluid mixed w acetone, liquid wrench.
I pulled apart the fcr35 but the float valve needle was stuck inside the seat. Removal was successful after soaking in various products including Coca Cola, pb blaster, wd40, automatic transmission fluid mixed w acetone, liquid wrench.
0 2018/03/27 09:17:00
Stock cvk and fcr35 pumper, both Keihin carbs
Stock cvk and fcr35 pumper, both Keihin carbs
0 2018/03/27 09:17:04
This should be showing up tomorrow. Will try to fit it up similar to the Scotts stabilizer
This should be showing up tomorrow. Will try to fit it up similar to the Scotts stabilizer
0 2018/03/27 09:43:14
12 possible flat tires.
12 possible flat tires.
0 2018/03/28 20:38:47
Got the cvk jetted correctly and the bike is alive now. Tomorrow the owner will take it for a ride. Ordered the repair parts for the Four Stroke Works Keihin fcr35. Jerry did a great job dialing in this carb.
Got the cvk jetted correctly and the bike is alive now. Tomorrow the owner will take it for a ride. Ordered the repair parts for the Four Stroke Works Keihin fcr35. Jerry did a great job dialing in this carb.
0 2018/03/28 20:42:19
0 2018/03/28 20:59:09
0 2018/03/28 20:59:16
0 2018/03/28 20:59:20
0 2018/03/28 21:05:22
0 2018/03/29 09:13:57
0 2018/03/29 18:21:54
Punched in the part number to find out what applications those updated springs fit. Shows it fits a 81-84 atc 250r.....,
Punched in the part number to find out what applications those updated springs fit. Shows it fits a 81-84 atc 250r.....,
0 2018/03/31 10:16:53
I used to race 85-6 atc250r/86-89 trx250rs and I just found a bunch of clutch springs for it. I’m going to try n see if they will work
I used to race 85-6 atc250r/86-89 trx250rs and I just found a bunch of clutch springs for it. I’m going to try n see if they will work
0 2018/03/31 10:16:57
Pilfered something off the old gal
Pilfered something off the old gal
0 2018/03/31 10:26:00
Fed ex showed up the one hour I left my house yesterday. Didn’t even hide the box behind the planter on the porch akmost like it was left out in plain sight on purpose. Grrrrrrrr idiot
Fed ex showed up the one hour I left my house yesterday. Didn’t even hide the box behind the planter on the porch akmost like it was left out in plain sight on purpose. Grrrrrrrr idiot
0 2018/03/31 10:26:07
The klx mounting kit parts $118
The klx mounting kit parts $118
0 2018/03/31 10:26:11
That bolt on tower will never be manufactured again I was informed by Scotts performance. Their guy got injured significantly and is in a care facility and will never again be able to work. Bunmer
That bolt on tower will never be manufactured again I was informed by Scotts performance. Their guy got injured significantly and is in a care facility and will never again be able to work. Bunmer
0 2018/03/31 10:31:30
Honda parts
Honda parts
0 2018/03/31 13:15:24
Left to right - ebc dirt racer klx250s clutch kit springs (Barnett’s were installed), atc350x, atc/trx250r, cr500
Left to right - ebc dirt racer klx250s clutch kit springs (Barnett’s were installed), atc350x, atc/trx250r, cr500
0 2018/03/31 13:15:31
I’m going to try the 22401-HA5-003 350x springs
I’m going to try the 22401-HA5-003 350x springs
0 2018/03/31 13:15:34
It’s really cool there’s girls out there that like to ride
It’s really cool there’s girls out there that like to ride
0 2018/03/31 14:01:20
0 2018/04/01 09:10:50
0 2018/04/03 09:17:58
Mocking it up. There’s more room available with the ims tank vs stock.
Mocking it up. There’s more room available with the ims tank vs stock.
0 2018/04/03 15:44:29
Yes the stabilizer arm is sitting on the black part of the pin. When the bars are installed there’s the 1/16”+ clearance.
Yes the stabilizer arm is sitting on the black part of the pin. When the bars are installed there’s the 1/16”+ clearance.
0 2018/04/03 15:44:35
Tank goes on no problem. There’s more room to work with than stock tank. I was gonna be lazy and mig weld it, wouldn’t have to take off the upper triple clamp/plastic stem brg cover. Just do one bead then cool it with air compressor n repeat. But I’ll take it apart n grease the head brgs too.
Tank goes on no problem. There’s more room to work with than stock tank. I was gonna be lazy and mig weld it, wouldn’t have to take off the upper triple clamp/plastic stem brg cover. Just do one bead then cool it with air compressor n repeat. But I’ll take it apart n grease the head brgs too.
0 2018/04/03 15:50:59
It’s been a while but I remember working with the restoration volunteers at the air & space museum in sd
It’s been a while but I remember working with the restoration volunteers at the air & space museum in sd
0 2018/04/04 11:08:14
0 2018/04/04 19:26:01
Finished
Finished
0 2018/04/06 11:57:19
Silicon bronze filler rod flows so easily compared to pushing the aluminum puddle.
Silicon bronze filler rod flows so easily compared to pushing the aluminum puddle.
0 2018/04/06 11:57:21