Anyone Interested in a TM36-68?

Thread Tools
 
Search this Thread
 
Old Feb 13, 2018 | 01:10 AM
  #1  
Ruggybuggy's Avatar
Thread Starter
|
Senior Member
Joined: May 2015
Posts: 329
From: Kenora, NWO, Canada
1st Gear Member
Default Anyone Interested in a TM36-68?

SOLD

I've decided to go back to my stock carb and wondering if anyone is interested in my TM36-68. I use my KLX351 as a snowbike in the winter and had issues with the carb icing up. I went back to the stock carburetor and added a screw in heater to solve the issue. The carb is in like new condition and will come with some needles and jets. I would say $150 shipped to the lower continental US would be a fair price. Sorry if this isn't posted in the right area. Pictures if this generates an interest.

Thanks

Pictures as promised







 

Last edited by Ruggybuggy; Feb 14, 2018 at 11:41 PM.
Old Feb 13, 2018 | 11:43 AM
  #2  
canklx's Avatar
Senior Member
Joined: Dec 2009
Posts: 286
From: Clearwater Bay, Ontario
1st Gear Member
Default

Are you running your 351 with the stock muffler?
If so does it work well?
 
Old Feb 13, 2018 | 12:13 PM
  #3  
Ruggybuggy's Avatar
Thread Starter
|
Senior Member
Joined: May 2015
Posts: 329
From: Kenora, NWO, Canada
1st Gear Member
Default

No, I managed to find a 300 headpipe and muffler. It doesn't have a cat and retains the spark arrester. I put an aftermarket tip on it so it would breather better. Nice thing is that if I drop the bike it won't dent like most of the aftermarket systems.

As for the carb, I need this gone by the end of the week. Pictures later today.
 

Last edited by Ruggybuggy; Feb 13, 2018 at 05:13 PM.
Old Feb 13, 2018 | 12:38 PM
  #4  
durielk's Avatar
Senior Member
Joined: Jul 2011
Posts: 1,728
From: Cottonwood, AZ USA
1st Gear Member
Default

I run my 351 with the stock muffler, runs fine. Has a lot of torque down low where I like it. and it is reasonably quiet, if you don't open the carb it could pass as a moped.
 
Old Feb 13, 2018 | 01:33 PM
  #5  
canklx's Avatar
Senior Member
Joined: Dec 2009
Posts: 286
From: Clearwater Bay, Ontario
1st Gear Member
Default

Originally Posted by Ruggybuggy
No, I managed to find a 300 headpipe and muffler. It doesn't have a cat and retains the spark arrester. I put an aftermarket tip on it so it would Heather better. Nice thing is that if I drop the bike it won't dent like most of the aftermarket systems.

As for the carb, I need this gone by the end of the week. Pictures later today.
Originally Posted by durielk
I run my 351 with the stock muffler, runs fine. Has a lot of torque down low where I like it. and it is reasonably quiet, if you don't open the carb it could pass as a moped.
Thanks guys.
Good luck with the sale.
 
Old Feb 13, 2018 | 03:06 PM
  #6  
Klxster's Avatar
Senior Member
Joined: Jun 2013
Posts: 3,317
From: North Texas
1st Gear Member
Default

BTW Ruggy, with the 300 exhaust system in place, you're now ready for the Four Stroke Works KLX300r header - Let that baby breath better..
 
Old Feb 13, 2018 | 03:21 PM
  #7  
Ruggybuggy's Avatar
Thread Starter
|
Senior Member
Joined: May 2015
Posts: 329
From: Kenora, NWO, Canada
1st Gear Member
Default

Originally Posted by Klxster
BTW Ruggy, with the 300 exhaust system in place, you're now ready for the Four Stroke Works KLX300r header - Let that baby breath better..
Probably won't be an advantage to me. I'm running with the lid on with the 300 snorkel. I have to run the lid to keep the snow off the filter.
 
Old Feb 13, 2018 | 03:32 PM
  #8  
MaximusPrime's Avatar
Senior Member
Joined: Mar 2012
Posts: 1,266
From: WMNF, NH, USA
1st Gear Member
Default

Yes, I'll need one of those soon.
PM me if you still have it.
 
Old Feb 13, 2018 | 04:39 PM
  #9  
Ruggybuggy's Avatar
Thread Starter
|
Senior Member
Joined: May 2015
Posts: 329
From: Kenora, NWO, Canada
1st Gear Member
Default

Originally Posted by MaximusPrime
Yes, I'll need one of those soon.
PM me if you still have it.
PM sent, still available.
 
Old Feb 13, 2018 | 05:30 PM
  #10  
sphen's Avatar
Senior Member
Joined: Apr 2017
Posts: 162
1st Gear Member
Default

how does the 36-38 compare/contrast with Bill's 33-34?
 



All times are GMT. The time now is 02:45 AM.