Two Kawi's for sale
ZX6 and 636 (clean titles)
CLEAN AND CLEAR TITLE
Built by Speet Tech and just complete overhaul by Mills Race Performance (owner of superbikes unlimited)
600 dynos at 138hp
636 dynos at 142hp
both bikes are the same with the exception of the 600, which does not have the 1/4 turn throttle.
the stuff
--------------------------
more compression
knifed and polished crank
valve job
new valves
new springs
new retainers
new piston rings
reset the cam timing
ported
polished and knifed crank shaft
kit ecu
Scotts steering stabilizer
Slipper clutch
1/4 turn throttle (636)
Tecktronics quick shifter
BMC air filter
had captive spacers made for the front and rear rims
rear caliper made captive
Hindle full racing pipe
Have dyno sheets
Ohlins fork springs and valves .95
Penski triple rear shock
525 rear spring
Always synthetic oil changed after ever trip to the track
Ready for the extra parts???
I have 2 kawi's for sale so the extra parts are negotiable with sale as i would like each bike to go with a good bit of extras. of course you are more than welcome to buy them both
2 VERY EXPENSIVE kit ECU’s
1 set of wheels with rotors, cushdrives, and sprockets
A spare set of throttle bodies
1 spare clutch
1 clutch basket
1 spare starter
636 pistons with rods
1 water pump
1 spare starter
1 clutch cover
2 right side engine cover (stock)
12 exhaust valves
8 intake valves
1 complete wiring harness
1 air box with injectors
1 oil pan
1 left side engine cover with alenator (stock)
1 set of 636 cams, intake and exhaust
1 chain tensioner
1 water pump cover and plumbing (stock)
1oil cooler
1 stock engine cover right side
4 coils
1 engine cam cover (stock)
1 hindle exhaust race header
1 chain cover (stock)
1 coolant over flow bottle
1 full hindle race exhaust
2 sets of vesrah brake pads
1 starter
2 stock throttle cables
1 ram air grill
2 new chains
1 clutch assembly
2 gas tanks, small dent in each but very usable
1 set of used body work
Bikes are located in South Western Wisconsin
For questions call 608-988-6384
http://i113.photobucket.com/albums/n...1/IMG_2386.jpg
http://i113.photobucket.com/albums/n...1/100_2449.jpg
http://i113.photobucket.com/albums/n...1/100_2448.jpg
http://i35.photobucket.com/albums/d1...g/100_1921.jpg
http://i35.photobucket.com/albums/d1...g/100_1922.jpg
CLEAN AND CLEAR TITLE
Built by Speet Tech and just complete overhaul by Mills Race Performance (owner of superbikes unlimited)
600 dynos at 138hp
636 dynos at 142hp
both bikes are the same with the exception of the 600, which does not have the 1/4 turn throttle.
the stuff
--------------------------
more compression
knifed and polished crank
valve job
new valves
new springs
new retainers
new piston rings
reset the cam timing
ported
polished and knifed crank shaft
kit ecu
Scotts steering stabilizer
Slipper clutch
1/4 turn throttle (636)
Tecktronics quick shifter
BMC air filter
had captive spacers made for the front and rear rims
rear caliper made captive
Hindle full racing pipe
Have dyno sheets
Ohlins fork springs and valves .95
Penski triple rear shock
525 rear spring
Always synthetic oil changed after ever trip to the track
Ready for the extra parts???
I have 2 kawi's for sale so the extra parts are negotiable with sale as i would like each bike to go with a good bit of extras. of course you are more than welcome to buy them both
2 VERY EXPENSIVE kit ECU’s
1 set of wheels with rotors, cushdrives, and sprockets
A spare set of throttle bodies
1 spare clutch
1 clutch basket
1 spare starter
636 pistons with rods
1 water pump
1 spare starter
1 clutch cover
2 right side engine cover (stock)
12 exhaust valves
8 intake valves
1 complete wiring harness
1 air box with injectors
1 oil pan
1 left side engine cover with alenator (stock)
1 set of 636 cams, intake and exhaust
1 chain tensioner
1 water pump cover and plumbing (stock)
1oil cooler
1 stock engine cover right side
4 coils
1 engine cam cover (stock)
1 hindle exhaust race header
1 chain cover (stock)
1 coolant over flow bottle
1 full hindle race exhaust
2 sets of vesrah brake pads
1 starter
2 stock throttle cables
1 ram air grill
2 new chains
1 clutch assembly
2 gas tanks, small dent in each but very usable
1 set of used body work
Bikes are located in South Western Wisconsin
For questions call 608-988-6384
http://i113.photobucket.com/albums/n...1/IMG_2386.jpg
http://i113.photobucket.com/albums/n...1/100_2449.jpg
http://i113.photobucket.com/albums/n...1/100_2448.jpg
http://i35.photobucket.com/albums/d1...g/100_1921.jpg
http://i35.photobucket.com/albums/d1...g/100_1922.jpg
Last edited by courtjester; Aug 28, 2009 at 03:28 AM.
Bump x2
Make an offer. I'm moving, working on graduate degree, and a **** ton of other things. I would really like to move these things.
Make an offer. I'm moving, working on graduate degree, and a **** ton of other things. I would really like to move these things.
Last edited by courtjester; Aug 28, 2009 at 03:29 AM.
Thank you. Between work, school, moving next month, and two kids getting older I’m not going to have any time to race. Both bikes have been over hauled at the beginning of the season and one bike was ran for only one race weekend. They are mechanically perfect and 100% race ready.
Thread
Thread Starter
Forum
Replies
Last Post
Finger Mullet
Off Topic
14
Jun 11, 2008 01:07 AM
Phil2801
PRIVATE For Sale / Trade Classifieds
0
Sep 1, 2007 12:22 AM
kali_ninja500
PRIVATE For Sale / Trade Classifieds
6
Jul 5, 2007 01:57 AM



