89 mustang gt trade
#1
89 mustang gt trade
looking to trade for a 2000zx9r or newer or 2000 zx7 or newer. I am in CT but would travel for the bike if needed.
Car was garaged kept and has maybe seen 3 winters over the years.
MOTOR DESCRIPTION:
345 HORSEPOWER 302 HO 5.0 (Motor Work alone with install $7,000).
Professionally built motor which was Balanced, Blueprinted, and Hand Assembled by ASE MASTER GOLD Certified Technicians at www.enginefactory.com in Irvington NJ.
Motor is 5 years old and has less than 10000 miles on it !
Precision Machined 302 Roller Cam Block
Precision Ground Micro-Polished Crankshaft
Forged TRW PISTONS
Forged Eagle Connecting Rods
Roller H.O Camshaft E303
Edelbrock Performer 289 Aluminum Intake
Edelbrock Performer Carb. 600 CFM Model 1405 4 barrel
Windsor Heads 64cc 200cc intake runners
2.02 Stainless Steel intake Valves
1.60 Stainless Steel Exhaust valves
Heavy Duty 1.250 Diameter valve springs, 7 degree locks
Aluminum Roller Rockers
Heavy Duty Pushrods
Chrome Valve covers
Bolted and Welded in Competition Engineering Sub-frame connectors
Flex-a-lite Fan
MSD Iginition
MSD Coil
MSD Distributor
150 AMP Heavy Duty Alternator for High wattage sound systems
Heater Core Replaced 2004
Ford Blue Silicone Hose Set
Stock 9.5 to 1 Compression Ratio setup for supercharging or nitrous no problem.
LIST OF PARTS REPLACED:
Brand new dunlop tires
Flowmasters 3 Chamber Exhaust System
Motor and Transmission mounts replaced
Heavy Duty Water pump
Pulleys
Flywheel
Centerforce Clutch
All interior power window and doorlock switches
Door lock solenoids`
New Fog lights
Saleen / LX Style Rear Light Lens Covers
Aluminum Radiator
Original 5 speed Transmission has 163,000 miles and operates fine because cars has never been abused.
And Much MUCH MORE! TOO MUCH TOO LIST!!!
Car was garaged kept and has maybe seen 3 winters over the years.
MOTOR DESCRIPTION:
345 HORSEPOWER 302 HO 5.0 (Motor Work alone with install $7,000).
Professionally built motor which was Balanced, Blueprinted, and Hand Assembled by ASE MASTER GOLD Certified Technicians at www.enginefactory.com in Irvington NJ.
Motor is 5 years old and has less than 10000 miles on it !
Precision Machined 302 Roller Cam Block
Precision Ground Micro-Polished Crankshaft
Forged TRW PISTONS
Forged Eagle Connecting Rods
Roller H.O Camshaft E303
Edelbrock Performer 289 Aluminum Intake
Edelbrock Performer Carb. 600 CFM Model 1405 4 barrel
Windsor Heads 64cc 200cc intake runners
2.02 Stainless Steel intake Valves
1.60 Stainless Steel Exhaust valves
Heavy Duty 1.250 Diameter valve springs, 7 degree locks
Aluminum Roller Rockers
Heavy Duty Pushrods
Chrome Valve covers
Bolted and Welded in Competition Engineering Sub-frame connectors
Flex-a-lite Fan
MSD Iginition
MSD Coil
MSD Distributor
150 AMP Heavy Duty Alternator for High wattage sound systems
Heater Core Replaced 2004
Ford Blue Silicone Hose Set
Stock 9.5 to 1 Compression Ratio setup for supercharging or nitrous no problem.
LIST OF PARTS REPLACED:
Brand new dunlop tires
Flowmasters 3 Chamber Exhaust System
Motor and Transmission mounts replaced
Heavy Duty Water pump
Pulleys
Flywheel
Centerforce Clutch
All interior power window and doorlock switches
Door lock solenoids`
New Fog lights
Saleen / LX Style Rear Light Lens Covers
Aluminum Radiator
Original 5 speed Transmission has 163,000 miles and operates fine because cars has never been abused.
And Much MUCH MORE! TOO MUCH TOO LIST!!!
Thread
Thread Starter
Forum
Replies
Last Post
Don_N_OK
800, 800 Classic & 800 Drifter
2
04-18-2013 02:06 PM
bernsax
General Motorcycle Discussion
1
06-09-2009 03:02 AM
espacef1fan
PRIVATE For Sale / Trade Classifieds
0
07-13-2008 12:25 AM