Hello
so I got myself a zx9r b4 97 first thing I did was clean and balance carbs service it ran sea foam in tank and cleaned the vavles after that the bike run all sweet not problem.
the end can was ugly and the last owner welded it on so I crop down to the base of the headers and put a zx10r link pipe with mivv exhaust. I orderd a jet kit from 6sigma stage 1 to 3 from us I'm in UK gave them all information they needed sweet here where it turns sour . Got kit noticed my jets are 200 main on all 4 they sent me 160 mains and 200 mains with 36 pilot jet 40 pilot jet had read. Put 160 mains and 36 pilot jets in tune it and balance. Taken out for ride where I noticed that I couldnt go anymore then 100mph felt like it wasn't getting fuel so went back had another read follow all the papers so I thought ok half turn more ok then out same again. Now I'm stuck any ideas guys