2nd gear
#1
10-22-2006, 06:50 PM
2nd gear
I have a problem withmy second gear slipping out at almostexactly 5000 rpms.
I am new and cant find any thing on it
I have a 92 750 i guess its a J or something like that.
Any way. some help would be great and any tips becouse i would like to do this repair
my self.
I am new and cant find any thing on it
I have a 92 750 i guess its a J or something like that.
Any way. some help would be great and any tips becouse i would like to do this repair
my self.
#2
10-22-2006, 07:39 PM
RE: 2nd gear
Welcome to KF trats
Slipping out of 2nd is not safe.
Any debris in the oil pan? Sounds like a trans pull and gear change at the moment.
Slipping out of 2nd is not safe.
Any debris in the oil pan? Sounds like a trans pull and gear change at the moment.
#3
10-22-2006, 08:01 PM
RE: 2nd gear
^^^^ On what Dragone said. If the gear "dogs" are chipped from wear, it could be hard to get the bike into gear without grinding, and could easy cause the gear to slip out.
The dogs of the gear are the 6 "studs" that stick up on the face of this gear on the picture.
The dogs of the gear are the 6 "studs" that stick up on the face of this gear on the picture.
#4
10-22-2006, 08:25 PM
RE: 2nd gear
As of right now it is not hard to get it into gear and it will run fine untill right around 5 rpms . If I rev past 5 rpm and go to say 6.5 and then let out on the clucth it will go just fine its some thing about 5 or 4.5 I guess. I am not shore on the savings in the oil pan I will check it out and get backto you on that one
#6
10-25-2006, 06:55 AM
RE: 2nd gear
ya right now i ether skip 2nd or i ride it to only 3.5 rpms or so and then gear up. and yes i think the gear dogs are it
so what part do i get from the dealer [:@] . i have been told it will only take 75 to 100 dallors to get the part. is that about right.
I know that i sound stpid but once i get the book i can do it my self unless there is some one in my area that would like a few beers and help me.
so what part do i get from the dealer [:@] . i have been told it will only take 75 to 100 dallors to get the part. is that about right.
I know that i sound stpid but once i get the book i can do it my self unless there is some one in my area that would like a few beers and help me.
#9
10-27-2006, 06:24 AM
RE: 2nd gear
I had a guy tell me it sounded like the synchronizer. Could this be the problem? or is this guy just way out in left field? I just wnat to know befor I take it apart and find out there is some thing else or that i was way off and orderd parts that they will not take back.