Jumper mod
Thread Starter
|
Senior Member
Joined: May 2007
Posts: 115
From:
Jumper mod
I got the new SSB mag and it shows how to do the jumper mod on the 07zx6r and gained 6.4hp.. my question is will it effect anything else like fuel/air ratio or anything and has anyone done it?
Senior Member
1st Gear Member
Joined: Mar 2006
Posts: 4,242
From: Keller (DFW), Texas
1st Gear Member
RE: Jumper mod
From what I know about the 05-06's, the ECU fully opens the Exhaust valve and feeds more fuel with the Jumper Mod but keeps the stock air/ fuel mapping at 13K and above.
Senior Member
1st Gear Member
Joined: Mar 2006
Posts: 4,242
From: Keller (DFW), Texas
1st Gear Member
RE: Jumper mod
I don't see why it would. The restriction was for EPA sound levels and they wouldn't know if you did it or not. When you take it in, just remove the jumper.
Senior Member
Joined: Jun 2006
Posts: 141
RE: Jumper mod
What mag is SSB? From what I've seen it's not good for much. http://www.motorcycle-usa.com/Articl...439&Page=1
Thread Starter
|
Senior Member
Joined: May 2007
Posts: 115
From:
RE: Jumper mod
SSB is Super Street Bike.. and mines a 2007 and there building one for the monster mile and that was the 1st thing they did to the bike and on the dyno made 6.4 hp more and got an extra .8 tenths at the drag strip and 12 mph on the top end.... so i think i'll try it
Administrator
1st Gear Member
Joined: Feb 2006
Posts: 17,484
From: bay area cali
RE: Jumper mod
please keep us posted.
ORIGINAL: superninja600
SSB is Super Street Bike.. and mines a 2007 and there building one for the monster mile and that was the 1st thing they did to the bike and on the dyno made 6.4 hp more and got an extra .8 tenths at the drag strip and 12 mph on the top end.... so i think i'll try it
SSB is Super Street Bike.. and mines a 2007 and there building one for the monster mile and that was the 1st thing they did to the bike and on the dyno made 6.4 hp more and got an extra .8 tenths at the drag strip and 12 mph on the top end.... so i think i'll try it