got my 09 dynoed this week
Thread Starter
|
Senior Member
1st Gear Member
Joined: Sep 2007
Posts: 101
got my 09 dynoed this week
The numbers:
112.95HP, 42.76lb of torque
The conditions:
It was around 85* and about 60% humidity. 35' above sea level.
The mods:
-Full akra evo system
-PC V
-Auto Tune
...coincidentally, I've had the BMC race filter on order with hardracing.com for a few months, they called me this morning (The day after I got tuned) to tell me they should be getting them in on tuesday and will be shipping me mine then...aint that a bitch? The guy that tuned my bike says the 08 zx 10s were seeing about a 4hp increase over stock with an K&N installed. He said once I get it in hes pretty positive id hit 115hp. He also said this is the strongest 600 he's ever had on his dyno and he's been doing it for 7 years.
The graph:
The pictures:
You couldn't be inside the room while they were doing it, but they have a glass window you can look through, thats what this pic was taken through.
I did try and see if the jumper mod worked for the 09s, it didn't.
-Cody
112.95HP, 42.76lb of torque
The conditions:
It was around 85* and about 60% humidity. 35' above sea level.
The mods:
-Full akra evo system
-PC V
-Auto Tune
...coincidentally, I've had the BMC race filter on order with hardracing.com for a few months, they called me this morning (The day after I got tuned) to tell me they should be getting them in on tuesday and will be shipping me mine then...aint that a bitch? The guy that tuned my bike says the 08 zx 10s were seeing about a 4hp increase over stock with an K&N installed. He said once I get it in hes pretty positive id hit 115hp. He also said this is the strongest 600 he's ever had on his dyno and he's been doing it for 7 years.
The graph:
The pictures:
You couldn't be inside the room while they were doing it, but they have a glass window you can look through, thats what this pic was taken through.
I did try and see if the jumper mod worked for the 09s, it didn't.
-Cody
I like that graph. Pretty dang smooth. I am curious now on what an aftermarket filter will do on the tune at sea level. That is a pretty strong run to beat for rideabilty. Congrats Was hopeing for more drive in the 10k rpm area for mid corner work. But I have not played with the 6r personnaly either. Just my opinion at the moment. lol Again, congrats on the nice graph.
Last edited by Dragone#19; May 16, 2009 at 02:10 AM.
Member
1st Gear Member
Joined: Jul 2008
Posts: 80
From: MAINE!
Im getting mine dynoed after I buy a GPR stabilizer next week. Id like to do both in the same week but my wallet cant fund that haha. When I get it done ill post the sheets will compare the ol 03 636 vs the 09 600
Thread
Thread Starter
Forum
Replies
Last Post