03 04 zx6r throttle body and no start
#1
03 04 zx6r throttle body and no start
This is my first post, thank you everyone for having me here and allowing me to speak and question my fellow kawi people!
So, I've looked everywhere! When I turn my machine on the throttle body secondary shutters close (bc they're already open) and open and don't go back down, they just try to open more it looks and sounds like. I've replaced the throttle body completely and it keeps doing the samething. I've just ordered a new ECU and hoping that fixes it. The bike wont start and if it does, it runs like complete ****! Ive literally taken out ever sensor and checked resistance and all come back with good readings. I took the bike apart and the motor sat for 2 years with no fluids in it, all ports where plugged. I have had it running but thought the power commander was messing it up so i tried reflashing everything, i think thats how the ECU really took a ****! So I unplugged it and it ran 5 times good but not again after that. Any comments and suggestions would greatly be appreciated!
So, I've looked everywhere! When I turn my machine on the throttle body secondary shutters close (bc they're already open) and open and don't go back down, they just try to open more it looks and sounds like. I've replaced the throttle body completely and it keeps doing the samething. I've just ordered a new ECU and hoping that fixes it. The bike wont start and if it does, it runs like complete ****! Ive literally taken out ever sensor and checked resistance and all come back with good readings. I took the bike apart and the motor sat for 2 years with no fluids in it, all ports where plugged. I have had it running but thought the power commander was messing it up so i tried reflashing everything, i think thats how the ECU really took a ****! So I unplugged it and it ran 5 times good but not again after that. Any comments and suggestions would greatly be appreciated!
#2
About the only active discussions on this forum revolve around KLX 250S bikes. You may have better luck at this forum:
Thread
Thread Starter
Forum
Replies
Last Post