Turn signals
Member
Joined: Mar 2006
Posts: 42
From:
RE: Turn signals
ORIGINAL: klxstiffler
cool, glad to hear they fit. i have the same ones on the rear but want them for the front too. the stock ones are just way to big for my tastes. keith
cool, glad to hear they fit. i have the same ones on the rear but want them for the front too. the stock ones are just way to big for my tastes. keith
I think I will just add the same ones to the rear like you. The front just bolted right on. I can send a pic of the actual wiring, it was so easy because the stock signals are connected by bullet connectors and just unplugged very easily. I simply stripped about 1/2 inch from the new signals and slid it into the female bullet connector on the bike and just clamped it down real good with some pliers.
Member
Joined: Mar 2006
Posts: 42
From:
RE: Turn signals
Not a real clear pic but you can see the bullet connectors wrapped in blue plastic insulators on the left and the bare wires of the new turn signal just to the right.
[IMG]local://upfiles/1550/F129B81016E049CD825B2EF75B28B94E.jpg[/IMG]
[IMG]local://upfiles/1550/F129B81016E049CD825B2EF75B28B94E.jpg[/IMG]
Thread
Thread Starter
Forum
Replies
Last Post
joelcool64
New Member Area
5
Sep 28, 2011 02:09 PM
