Might have made a mistake!

Thread Tools
 
Search this Thread
 
  #1  
Old 03-17-2007 | 06:49 AM
secondclasshero's Avatar
Thread Starter
|
Member
1st Gear Member
Joined: Feb 2007
Posts: 93
From: Walla Walla
Default Might have made a mistake!

I ordered a Renthal 45 rear for klx300 and a 520/108 ORH x-ring chain. The sprocket should fit right? I am scared the chain won't fit. Just trying to follow threads but I might have f'd up. any help thanks.
 
  #2  
Old 03-17-2007 | 07:05 AM
Rusty FJ's Avatar
Senior Member
1st Gear Member
Joined: Nov 2006
Posts: 242
From:
Default RE: Might have made a mistake!

i believ it will, after all I hear they are the same bike essentially, however the klx has a 250 jug on it instead of a 300, for regulations.
 
  #3  
Old 03-17-2007 | 02:58 PM
vfrpilot's Avatar
Senior Member
1st Gear Member
Joined: Apr 2006
Posts: 1,349
From:
Default RE: Might have made a mistake!

The stuff that you ordered is the correct parts. All will fit with no problems!
 
  #4  
Old 03-17-2007 | 04:10 PM
tremor38's Avatar
Senior Member
Joined: Oct 2006
Posts: 3,106
From: Misawa Japan
1st Gear Member
Default RE: Might have made a mistake!

Engine has no bearing. He ordered a rear sprocket, which should work just fine.

For your info, KLX250 and KLX300 front sprockets are not interchangable.

ORIGINAL: Rusty FJ

i believ it will, after all I hear they are the same bike essentially, however the klx has a 250 jug on it instead of a 300, for regulations.
 
  #5  
Old 03-17-2007 | 05:33 PM
double d6's Avatar
Senior Member
1st Gear Member
Joined: Nov 2006
Posts: 271
From:
Default RE: Might have made a mistake!

I just ordered the exact same set-up, so I hope we are right too!!!

We should be good to go though.........no worries........
by the way...where did you get the 45t and how much?? post a link..this is what I'm getting>>
http://www.westymotorsports.com/.sc/...able=upsgndres

Dave
 
  #6  
Old 03-17-2007 | 05:35 PM
JB1's Avatar
JB1
Senior Member
1st Gear Member
Joined: Dec 2006
Posts: 656
From: Houston
Default RE: Might have made a mistake!

Your ordered the right parts, thats the same setup Im running on my bike.

 
  #7  
Old 03-17-2007 | 06:54 PM
secondclasshero's Avatar
Thread Starter
|
Member
1st Gear Member
Joined: Feb 2007
Posts: 93
From: Walla Walla
Default RE: Might have made a mistake!

DoubleD6 I got the sprocket from http://monkeybuttparts.com/pk4/store.pl?section=449 they got the mix up in the shipping and I won't see it till wed. The chain and would have also been the sprocket I got from rockymountainatv.com , that place is great. ships out of Utah so I get it in like 3 days. So I have the chain and gear to put it on but no sprocket, dang. And I'm going to the hills sunday. Oh well it's riding season. Thank.
 
  #8  
Old 03-17-2007 | 07:25 PM
double d6's Avatar
Senior Member
1st Gear Member
Joined: Nov 2006
Posts: 271
From:
Default RE: Might have made a mistake!

Cool.............Well, I'm doing the same set-up......so good luck to ya.........let me know how you make out. I'm pretty excited about my last purchase of goodies, got some new tires and a rear fender bag from Dirt-bag-gear.com plus some spare heavy duty tubes and a CO2 inflator.
Now,all I need is the free mods, an exhaust and some wide foot pegs and I'm done.

Dave
 
  #9  
Old 03-17-2007 | 09:52 PM
jeepphamilee's Avatar
Senior Member
Joined: Apr 2006
Posts: 161
From:
Default RE: Might have made a mistake!

ORIGINAL: JB1

Your ordered the right parts, thats the same setup Im running on my bike.

+1
 
  #10  
Old 03-18-2007 | 05:24 AM
DirtSurfer's Avatar
Senior Member
1st Gear Member
Joined: Sep 2006
Posts: 563
From:
Default RE: Might have made a mistake!

ORIGINAL: double d6

Now,all I need is the free mods, an exhaust and some wide foot pegs and I'm done.

Dave
Trust me, your NEVER DONE...

"you can checkout any time you like, but you can't never leave...."[8D]

 


Quick Reply: Might have made a mistake!



All times are GMT. The time now is 10:50 PM.