KLX300 performance mods - listing and findings
#1
KLX300 performance mods - listing and findings
We need a thread that lists knowledge regarding KLX300 performance enhancements that are easily duplicated by all - meaning knowledge that is using aftermarket components or free mods. Please feel free to post any/all that I may have missed and I will add to this top post.
@Nigel has created a PCFC tune for slipon + STP delete + KDX snorkel.
@billp91311 reports that the Dynojet PCV tune for the "KLX300R + slipon" , when loaded onto a KLX300 PCFC, works well for Slipon + STP delete.
@Olderider is running lidless, Barker System, STP removed, and EHS Racing tuner. His power levels are at or a bit above 27hp. EHS Racing offers a tuner with tunes developed for the most logical mod combos once the STP has been removed - including Lidless + Barker System
Secondary throttle plate ( STP ) removal should be the FIRST mod done to a stock KLX300 - it is a "game changer" performance wise.
Pinit Racing offers a performance ECM. When they complete their programming project, their ECM will not require STP removal. Currently dyno testing shows 26hp and massive midrange increases over stock. At this time, they suggest mods that destroy a KLX300 airbox and silencer - I do not recommend doing this - There is certainly no evidence of effectiveness in doing so at this time.
@Nigel has created a PCFC tune for slipon + STP delete + KDX snorkel.
@billp91311 reports that the Dynojet PCV tune for the "KLX300R + slipon" , when loaded onto a KLX300 PCFC, works well for Slipon + STP delete.
@Olderider is running lidless, Barker System, STP removed, and EHS Racing tuner. His power levels are at or a bit above 27hp. EHS Racing offers a tuner with tunes developed for the most logical mod combos once the STP has been removed - including Lidless + Barker System
Secondary throttle plate ( STP ) removal should be the FIRST mod done to a stock KLX300 - it is a "game changer" performance wise.
Pinit Racing offers a performance ECM. When they complete their programming project, their ECM will not require STP removal. Currently dyno testing shows 26hp and massive midrange increases over stock. At this time, they suggest mods that destroy a KLX300 airbox and silencer - I do not recommend doing this - There is certainly no evidence of effectiveness in doing so at this time.
Last edited by Klxster; Yesterday at 03:44 AM.
#2
EHS racing has a fuel tuner for the full barker exhaust , secondary throttle plate removed and air box mods lidless.
They also have tunes for stock bikes with secondary throttle plate removed and different air box mods like snorkle removal.
They also have tunes for stock bikes with secondary throttle plate removed and different air box mods like snorkle removal.
#3
There is a sub-forum for the KLX300R. One thing I've tried to do was promote this forum for the 300s because other than the displacement and EFI all of them are very very similar since the first KLX250R in 1994. I've especially been pushing the forum at ADVriders forum where there is so much segmentation when someone doesn't look, plus it's easier to look through the topics here rather than searching one long thread. Maybe the administrators here could re-title that sub-forum to reflect the new 300S and 300SF as well as the R.
#5
Thread
Thread Starter
Forum
Replies
Last Post