Looking for front wheel hub
Senior Member
Joined: Aug 2009
Posts: 4,647
From: Delaware, Ohio
1st Gear Member
Wish you the best of luck. That darn electronic speedo setup is the headache. If it was only the pre-09 you'd have no problem. At least any of the 09 and later should work fine, but probably really hard to find.
Thread Starter
|
Senior Member
Joined: May 2018
Posts: 176
From: Portland Oregon
1st Gear Member
Yes. Can't find one anywhere except stock from factory for $650 for just the hub. I have a 17" SF front that I want to convert to 19" but don't want to rip apart my original wheel.
Senior Member
Joined: Aug 2009
Posts: 4,647
From: Delaware, Ohio
1st Gear Member
The one way to deal with this on the cheap would be to go with an earlier hub that fits, but without the speedo drive, then install a Vapor gauge setup in place of the OEM speedo. That would even allow use of some MX hubs with no drive what so ever. The speedo drive is the big stopper, whether the mechanical one or the electronic one.
Thread
Thread Starter
Forum
Replies
Last Post
