Kouba FS2 fuel screw
#11
10-10-2008, 11:28 PM
For those interested, FCR35 fuel screw on the left, stock CVK fuel screw on the right. XR's only must be making two different flexable screws, I just can't see 1 screw fitting both carbs
Last edited by 2k1w=no$; 10-10-2008 at 11:40 PM.
#13
10-13-2008, 11:48 AM
Which ever way you do it, make sure the little O-ring gets back in the right place before you put the screw back in.
If the O-ring doesn't come out with the screw, don't attempt to put the screw back in until you get that little bugger out or can ensure it's were it is supposed to be and not hung-up in the threads.
I personally recommed pulling the carb. It gets easier with each attempt anyway.
If the O-ring doesn't come out with the screw, don't attempt to put the screw back in until you get that little bugger out or can ensure it's were it is supposed to be and not hung-up in the threads.
I personally recommed pulling the carb. It gets easier with each attempt anyway.
Thread
Thread Starter
Forum
Replies
Last Post
