KLX 250 s lack parts available
Thread Starter
|
Junior Member
Joined: Jan 2013
Posts: 8
KLX 250 s lack parts available
hi is it me or is there lack parts avaiable for the klx iv looked on the net e bay in fact iv tried every combination of searches to find parts after market etc..
im in the UK and if i typed drz or ktm my return searches are flooded with bits
all i want it simple stuff even more confuseing
exhaust can
jet kit if applicable
gearing
bar riser
bars
etc
tell me its my search words lol or have i brought a non modded or modable bike
im in the UK and if i typed drz or ktm my return searches are flooded with bits
all i want it simple stuff even more confuseing
exhaust can
jet kit if applicable
gearing
bar riser
bars
etc
tell me its my search words lol or have i brought a non modded or modable bike
Senior Member
Joined: Oct 2009
Posts: 840
From: Sandpoint Idaho
1st Gear Member
Every Aftermarket thing you want is available here in the US. Try Searching again.
Jetting try Dyno Jet jetting kit or Moose Jetting (same kit different name). Exhaust, FMF, HMF, Two Brothers. Also try searching for KLX300, some parts are interchangeable.
Jetting try Dyno Jet jetting kit or Moose Jetting (same kit different name). Exhaust, FMF, HMF, Two Brothers. Also try searching for KLX300, some parts are interchangeable.
Senior Member
Joined: Oct 2009
Posts: 840
From: Sandpoint Idaho
1st Gear Member
Bar Risers are a universal 7/8" bar.
Here are some examples.
I have these
Here are some examples.
I have these
Senior Member
1st Gear Member
Joined: Sep 2012
Posts: 434
From: Sandy Eggo
I didnt see much in gearing either, but I didnt really look too hard
I did get my gear from here Kawasaki KLX250S Parts, Performance, & Accessories - ProCycle
bars are pretty much universal so are risers
ive seen many exhausts, and jets are specific to your carb model
I cant see how those are hard to find this is a major brand name bike
racks are available
im sure pegs are
suspension is probably sort of universal too
I did get my gear from here Kawasaki KLX250S Parts, Performance, & Accessories - ProCycle
bars are pretty much universal so are risers
ive seen many exhausts, and jets are specific to your carb model
I cant see how those are hard to find this is a major brand name bike
racks are available
im sure pegs are
suspension is probably sort of universal too
Senior Member
1st Gear Member
Joined: Jan 2013
Posts: 1,422
From: Las Vegas, NV
JT sprockets for gearing, JCWitney(sp) for other parts, and Genuine OEM Kawasaki Dirt Bike Parts | MotoSport for OEM parts
Member
1st Gear Member
Joined: Oct 2012
Posts: 63
From: Oriental, NC
Senior Member
1st Gear Member
Joined: Mar 2010
Posts: 407
From: Rio de Janeiro, Brazil
12oClockLabs
D.I.D Motorcycle Chains and DirtStar® Rims
JT Sprockets
- DRC PRODUCTS -
- ZETA RACING -
D.I.D Motorcycle Chains and DirtStar® Rims
JT Sprockets
- DRC PRODUCTS -
- ZETA RACING -
Last edited by Malves; Jan 25, 2013 at 09:56 PM.
Member
Joined: May 2012
Posts: 53
From: Norwich UK
1st Gear Member
parts
hello r1 Andy,
I too am in the UK. As for my 2012 klx, I had to look hard for parts. I was not interested in tuning it for speed etc but i did put some zeta parts on it (ebay). Some renthal bars, and a b&b bash plate from OZ. I disconnected the clutch switch for more rev's, I think it works. If i were to get an exhaust i'd buy a gpr system.
ALL THIS WAS IN VAIN AS MY KLX met a sad death last week as it melted away in a garage fire last week. I'm going to put some pic's on here soon when i dig it out from under the rubble. So im going to haveto start all over again when I order a new one. Shame they went up in price though.
I too am in the UK. As for my 2012 klx, I had to look hard for parts. I was not interested in tuning it for speed etc but i did put some zeta parts on it (ebay). Some renthal bars, and a b&b bash plate from OZ. I disconnected the clutch switch for more rev's, I think it works. If i were to get an exhaust i'd buy a gpr system.
ALL THIS WAS IN VAIN AS MY KLX met a sad death last week as it melted away in a garage fire last week. I'm going to put some pic's on here soon when i dig it out from under the rubble. So im going to haveto start all over again when I order a new one. Shame they went up in price though.
