I had installed a fmf Q4 exhaust with a port matched header, cvk34 carb with dj kit 2206, 132 dj main, 38 pilot, dj needle 3rd clip, with all the free mods & no air box lid. Fuel mixture screw 2 turns out. This jetting worked at sea level, but seems a bit rich at the altitude the owner lives and rides (2-5’K
asl).
So im gonna turn in the fuel mixture screw 1/4 turn and raise the needle clip one notch (lowering the needle). I hope that will help correct my jetting guesstimate, and the stalling experiences by the gal at stop lights....