Helmet Cam - Take 2

Thread Tools
 
Search this Thread
 
  #1  
Old 06-09-2008, 11:54 PM
Nobrakes's Avatar
Admin
1st Gear Member
Thread Starter
Join Date: Jan 2006
Posts: 7,269
Default Helmet Cam - Take 2

This one even has a KLX in it. Some trails from Sunday's ride. HardTaco leads the way. There was a much better section, but the camera got tilted 45 degrees at some point on that one and it makes my head hurt to watch it, so I didn't include that. Again, YouTube degrades the quality quite a bit. I wish I could do something about that.

http://www.youtube.com/watch?v=INgWN7YJT3g



EDIT: click the "watch in high quality" link below the vid in youtube and it helps.

 
  #2  
Old 06-10-2008, 12:47 AM
lcpl0331's Avatar
Senior Member
1st Gear Member
Join Date: Mar 2007
Location: The RIGHT coast
Posts: 1,534
Default RE: Helmet Cam - Take 2

another good video Brian. The quality isn't that bad. when i went with the irish last week Collie took a pretty good sh***er(again) and i had to pick up his 525. those bike are LITE. i bet his KTMdoesn't weigh much more than my KLX. the power to weight ratio has to be thru the roof. kinda wish i had one.
 
  #3  
Old 06-10-2008, 01:17 AM
Nobrakes's Avatar
Admin
1st Gear Member
Thread Starter
Join Date: Jan 2006
Posts: 7,269
Default RE: Helmet Cam - Take 2

Thanks. I'm still working on the quality. It's not too bad, but I've seen better from the same camera, so I'm wondering what I'm doing wrong.

I remember Collin saying he was thinking about getting one last year at the NE ride but he and the other Irish bugged out early on Day 2 and I didn't get a chance to offer him a test ride on the 450. They are a lot of fun, that's for sure. But in that tight stuff, the 450 doesn't buy you too much because there's not a lot of room. But it sure feels good when you pop the throttle in a corner and it slings you right out.

I hope Collie is OK. He took a hard one at the NE ride, too. Of course, I don't have to tell you that, since it was you that got tangled up in it. [&:]

 
  #4  
Old 06-10-2008, 01:33 AM
lcpl0331's Avatar
Senior Member
1st Gear Member
Join Date: Mar 2007
Location: The RIGHT coast
Posts: 1,534
Default RE: Helmet Cam - Take 2

i haven't talked to them this week as i was at americade but this one was worse than the pine barrons.he hit so hard thathe snapped the bolt that goes into the handlebar for the bark buster in half.i was out in front aways and still heard him hit theground. I thought it a bit funny but he just couldn't seem to find any humor in it. He was too busy being in a lot of pain. i'll give him some credit though we had a good 20 miles to get to the lunch stop and he toughed it out.
 
  #5  
Old 06-10-2008, 01:55 AM
QuiteThumper's Avatar
Senior Member
1st Gear Member
Join Date: Jul 2007
Posts: 128
Default RE: Helmet Cam - Take 2

Nice, more good vids!

What carb is on Your bike? The "off idle" acceleration seems smoother than my tm34 pumper. Are You running 2nd gear and less than 3k rpm most of the time on that trail?
 
  #6  
Old 06-10-2008, 03:41 AM
Nobrakes's Avatar
Admin
1st Gear Member
Thread Starter
Join Date: Jan 2006
Posts: 7,269
Default RE: Helmet Cam - Take 2

My bike has an FCR 39 on it. It is tuned well, no bog anywhere, pulls strong everywhere. Most of that is 1st gear, I'd say 70/30 1st and and 2nd.
 
  #7  
Old 06-10-2008, 04:18 AM
Nobrakes's Avatar
Admin
1st Gear Member
Thread Starter
Join Date: Jan 2006
Posts: 7,269
Default RE: Helmet Cam - Take 2

Watching the vid again, I think most of that probably is 2nd gear.
 
  #8  
Old 06-10-2008, 01:22 PM
Nobrakes's Avatar
Admin
1st Gear Member
Thread Starter
Join Date: Jan 2006
Posts: 7,269
Default RE: Helmet Cam - Take 2

One more for now. Are you all sick of this stuff yet?

http://www.youtube.com/watch?v=mlwpiHjyzIA

 
  #9  
Old 06-10-2008, 01:43 PM
EMS_0525's Avatar
Da dirty moderator
1st Gear Member
Join Date: May 2006
Location: Pittsburgh, PA
Posts: 12,584
Default RE: Helmet Cam - Take 2

you guys dont have many hills do ya? that all looked pretty flat... i have some crazy hills up here....
 
  #10  
Old 06-10-2008, 02:28 PM
deej's Avatar
Your Humble Moderator/Admin
1st Gear Member
Join Date: Nov 2005
Location: Washington
Posts: 21,060
Default RE: Helmet Cam - Take 2

Nice vid man. I should scare up one of mine.
 


Quick Reply: Helmet Cam - Take 2



All times are GMT. The time now is 11:06 AM.