Florida pumper carb owners....
#1
Florida pumper carb owners....
Wondering what the guys in florida (or anyone elseat sea level) jetting is for their pumper carb. I haven't decided which carb I am gonna get yet so it doesn't matter if its an fcr35 or a tm33 modified by bill blue really. I just want a good starting point for my bike which will have a 331 jug on it here in a few weeks.
Please post up your jetting for your pumper if your around sea level and have a big bore kit. Thanks!
Please post up your jetting for your pumper if your around sea level and have a big bore kit. Thanks!
#5
Bump for 1cam. Someone help a brutha out.
I did a quick search and came up with this, not sure if it will help you or not, but maybe a starting point for the jetting:
https://www.kawasakiforums.com/forum...ad.php?t=11583
BTW, I'm in NC which is a little higher than FL, but not too much. I no longer have my FCR35 carb, but if memory serves, I ended up with:
Pilot: 48 or 50
Needle: OCEMN
Clip Position from top: 4th
Main Jet: 150
Fuel Screw: 2.0 out
Main Air: 200
Pilot Air Jet: 1 out
Or somewhere thereabouts, not quite positive on where I left the final jet sizes, but they were close to that when I sold it last year. It was running great with that here in NC.
I did a quick search and came up with this, not sure if it will help you or not, but maybe a starting point for the jetting:
https://www.kawasakiforums.com/forum...ad.php?t=11583
BTW, I'm in NC which is a little higher than FL, but not too much. I no longer have my FCR35 carb, but if memory serves, I ended up with:
Pilot: 48 or 50
Needle: OCEMN
Clip Position from top: 4th
Main Jet: 150
Fuel Screw: 2.0 out
Main Air: 200
Pilot Air Jet: 1 out
Or somewhere thereabouts, not quite positive on where I left the final jet sizes, but they were close to that when I sold it last year. It was running great with that here in NC.
Last edited by Nobrakes; 08-27-2008 at 02:40 AM.
#6
Thanks for the reply finger... I was starting to second guess my 331 and pumper purchase.
Where did you get your fcr35 from? Fourstrokeworks by chance?
Thanks
#7
Wow you two got trigger fingers on the forum....I just posted and you already responded.
Second hand indirectly from four strokes works....hold on a second ...if you can ....I'll look at the spec sheet recommendations from four strokes for the klx...
holding
holding
holding
Found it
Exhaust Valve Lash shim 0.006-0.008
Intake Valve Lash Shim 0.004-0.006
Pilot 52
Needle OCDVR
Clip 3rd from top
Main 152
Fuel Screw 1.5 out
Main Air Jet 200
Pilot Air Jet 1.5 out
Help?
Yo NoBrakes.... you do any C# applications....need a little side work??
Second hand indirectly from four strokes works....hold on a second ...if you can ....I'll look at the spec sheet recommendations from four strokes for the klx...
holding
holding
holding
Found it
Exhaust Valve Lash shim 0.006-0.008
Intake Valve Lash Shim 0.004-0.006
Pilot 52
Needle OCDVR
Clip 3rd from top
Main 152
Fuel Screw 1.5 out
Main Air Jet 200
Pilot Air Jet 1.5 out
Help?
Yo NoBrakes.... you do any C# applications....need a little side work??
#10
No iphone help needed..lol....what I need ...needs to run on .NET
Hey can an Apple run .NET applications??? You want to learn C#, I just know it Make lots of side cash for ktm farkles....it's even better than google eyes.
Hey can an Apple run .NET applications??? You want to learn C#, I just know it Make lots of side cash for ktm farkles....it's even better than google eyes.