Aftermarket shift lever
#1
Aftermarket shift lever
Will one from the klx300 work? I bent me shift lever pretty good this past week at the pine hill enduro in south jersey. Its still useable but I would like to replace it with something a little stronger.
#2
RE: Aftermarket shift lever
Bump on this******
I just bent my gear shifter and brake pedal............
Mrcycles wants $48 and $37 for these parts....
Hope there are some aftermarket parts that fit that are stronger and cheaper.
Sorry to jump in on the thread, but why clutter the board...right?
Dave
I just bent my gear shifter and brake pedal............
Mrcycles wants $48 and $37 for these parts....
Hope there are some aftermarket parts that fit that are stronger and cheaper.
Sorry to jump in on the thread, but why clutter the board...right?
Dave
#3
RE: Aftermarket shift lever
I don't know about the brake pedal, but IMS makes a shifter for the KLX250. They want $29.99 for it though. You can check it out here:
http://www.imsproducts.com
http://www.imsproducts.com
#4
RE: Aftermarket shift lever
ORIGINAL: mustang
I don't know about the brake pedal, but IMS makes a shifter for the KLX250. They want $29.99 for it though. You can check it out here:
http://www.imsproducts.com
I don't know about the brake pedal, but IMS makes a shifter for the KLX250. They want $29.99 for it though. You can check it out here:
http://www.imsproducts.com
#5
RE: Aftermarket shift lever
I wonder how bike specific these two parts are?? I bet any klx shifter would fit.............
the brake pedal may have to be more accuratebut not sure...................
We'll wait to see what others think....
Dave
#8
RE: Aftermarket shift lever
I sent Sunline a message about a shifter for our bikes, I'll pass on the info.............
http://monkeybuttparts.com/pk4/store...w_product=2228
I've read posts here that say the KLX300 shifter will NOT fit, it hits the case.
https://www.kawasakiforums.com/m_54721/mpage_1/tm.htm
I'll keep searching..............can't believe nobody else bent theirs yet............they seem to bend so easy, escpecially the brake pedal. I bent it back in place by hand.
Dave
http://monkeybuttparts.com/pk4/store...w_product=2228
I've read posts here that say the KLX300 shifter will NOT fit, it hits the case.
https://www.kawasakiforums.com/m_54721/mpage_1/tm.htm
I'll keep searching..............can't believe nobody else bent theirs yet............they seem to bend so easy, escpecially the brake pedal. I bent it back in place by hand.
Dave
#10
RE: Aftermarket shift lever
It looks like the gold will match any after market gold chain and the brownish arm willlook clean against the brown case!!
Hope they make a model that will fit.......................
Dave
Hope they make a model that will fit.......................
Dave