Hi guys! Quick question. I have a 05 ZZR600, and I ran into a few issues. I ordered a new rectifier and the one the sent me, MZS Tuning E-040 is a 6 pin. I also ordered the 6 pin adapter so I don’t have to replace the harness every time. But my issue is that there are 7 wires coming from the bike, 3 from the stator, one B/W which is the negative, one B/R which is the load wire, one B/Blue that is the main fused positive, and there is an extra black. So my main question is how to convert the 7 wire to a 6 pin plug for my new rectifier. Thanks all!