No power after changing fuse
Hey guys new here to the forums and needed some help.
my sister inlaw has a kfx700 not sure on year but I will get it for u guys. The battery tray did not come with atv so it just sits in place. From bumping around it broke through the battery terminal cap and was grounding out eventually blowing the 30amp fuse. Now when I replace the fuse the bike starts but when I press the brake the lights go really dim sometimes dies then I have to remove the fuse and the ground wire for a lil bit then put it all back together and it'll start again. If anyone can tell me what to check next I would greatly appreciate it thanks in advance...
my sister inlaw has a kfx700 not sure on year but I will get it for u guys. The battery tray did not come with atv so it just sits in place. From bumping around it broke through the battery terminal cap and was grounding out eventually blowing the 30amp fuse. Now when I replace the fuse the bike starts but when I press the brake the lights go really dim sometimes dies then I have to remove the fuse and the ground wire for a lil bit then put it all back together and it'll start again. If anyone can tell me what to check next I would greatly appreciate it thanks in advance...
Thread
Thread Starter
Forum
Replies
Last Post



